VKT company produces flow units in two episodes: VKC And VKM. Wide range of air handling units VKT allows you to satisfy the entire range of needs. The performance range of this equipment is from 1000 to 150,000 m 3 /h and its ability, depending on the configuration, to carry out air preparation in accordance with all current requirements in Russia.

During productionair handling units components from the world's leading manufacturers are used, such as: Belimo, Arosio, Nicotra, Matra, Munsters, Siemens, Ziehl-Abegg. The production is equipped with the most advanced metalworking complexes. At the same time, VKT products are distinguished by low price and high quality, customer-friendly delivery conditions and minimal lead times.

VKC air handling units consist from standard sections designed for various air treatment processes.

Standard sizes air supply units VKC: VKC 1.6, VKC 3.15, VKC 5 VKC 6.3, VKC 8, VKC 10, VKC 12.5, VKC 16, VKC 20, VKC 25, VKC 31.5, VKC 45

VKM air handling unitshave an air valve, filter, water or electric heat exchanger and fan. Standard sizesair supply units VKM:VKM 600x350/4.3 , VKM 600x350/6.3 , VKM 700x400/4.3 , VKM 600x350/6.3 , VKM 800x500/4.3 , VKM 800x500/6.3 , VKM 900x500/6.3 , VKM 900x500/8.3

Fans

Fans used in VKT air handling units:

Double-sided suction with V-belt drive. The main advantage is the provision of accurate parameters due to the large number of combinations of pulley diameters on the fan and motor shaft, without the use of a frequency converter, which simplifies the automation system.

Single-sided suction with backward curved blades. High efficiency compared to the previous one, reduced dimensions of the fan unit.

Motor wheels with backward curved blades and electronically commutated motors. Low energy consumption compared to asynchronous motors, the ability to set algorithms for changing engine speed depending on various factors.

Motor wheels with forward curved blades. Small dimensions, which allows these fans to be used in compact air-intake units, at a relatively low cost but without losing quality.

Air heaters

The choice of heat exchanger for heating the supply air depends on the facility’s power supply scheme.

The most common are water heat exchangers. They can operate at temperatures up to 150 °C and at pressures up to 10 atmospheres. In addition, water heat exchangers are not particularly critical to coolants with a low freezing point.

Steam heat exchangers have a rather complex piping system to operate at higher temperatures and pressures.

Electrical heat exchangers, It can be attributed to the fact that they do not need a thermal control unit and hydraulic routes. In addition, when using them there is no threat of freezing of the coolant.

Air coolers

To cool the supply air to the required temperature, coolers of various types and classes are used.

Water coolers have the ability to precisely regulate the air temperature with an accuracy of 1 degree, using a thermal control unit. Water supply is provided by a chiller.

Freon coolers eliminate the need to use a pumping group and a thermal control unit for the intermediate coolant, since cooling occurs on the principle of “direct evaporation”.

Air valves

On VKT supply and exhaust units, air valves are used to prevent outside air from entering the unit during the winter period, while the valve uses an actuator with a return spring. On VKT air handling units using recirculation, valves serve to regulate the amount of recirculated air. Also, valves are used in the bypass channel of the recuperator and in the backup fan section.

In areas with frosty climates, insulated air valves are used to prevent condensation and freezing. Smooth heating elements with a power of 0.5 kW are installed in the blades of such valves and additional heating of the electric drive is performed.

Choosing air handling unit VKT, there are many factors to consider. The unit must satisfy a large number of requirements, such as: optimal combination of performance, availability of necessary units, noise level, ease of installation and maintenance, manufacturer’s warranty, availability of service.

Fire ventilation equipment

Today, the VKTekhnologiya company offers the widest range of fire dampers on the Russian market of climate control equipment and the main models of smoke removal fans.

The company's plant produces fire dampers for various functional purposes:

• fire retardant (NO, NZ, DD);
• smoke (NS);
• explosion-proof (NO, NC).

Fire retardant valve serves to prevent the spread of fire through air ducts and in most cases, fire arresting valves will be able to close access to the ventilation system in the event of a fire. The VKTekhnologiya company manufactures fire-retarding valves in various modifications.

The smoke valve is used to remove smoke and gas from the room in which the fire has occurred. The explosion-proof valve is designed for installation in rooms where explosive mixtures of different categories are moved.

The fire retardant valve is the most popular on the market and is manufactured in rectangular and round sections. The smoke valve is usually made of a rectangular cross-section in a duct or wall design, but is also available in a round cross-section, like fire retardant valve. The explosion-proof valve is made of rectangular and circular cross-section, just like fire-retardant valves.

Fire dampers: explosion-proof/fire-retardant/smoke/smoke removal valves, manufactured under the VKT brand, are distinguished by their reliability and high level of performance, confirmed by years of successful work in the fire-fighting equipment market. VKT manufactures valves with any currently acceptable fire resistance values.

• fire resistance limits for fire-retardant valves KPS – 1, 1.5, 2, 3 hours
• fire resistance limits for smoke dampers KDM – 1.5 hours
• fire resistance limits for explosion-proof valves KPS-1-V – 1 and 1.5 hours

In addition, the VKT company offers the shortest production time for fire-retarding valves and smoke valves on the Russian market today - 3 days.

Smoke valve one of the types of fire dampers, manufactured in two types: KDM-2m and KDM-2s. According to its functional purpose, it is used as a smoke damper with a normally closed damper and is intended for use in smoke protection systems for buildings and structures. The smoke valve is used to remove smoke and combustion products from the room. In the event of a fire, the valves open to ensure the removal of smoke or the supply of air to the protected volumes.

The smoke damper is available in both wall and duct versions and can be installed in vertical and horizontal smoke ventilation openings. Smoke dampers are operational in any spatial orientation and cannot be installed in ventilation ducts of rooms of categories A and B due to explosion and fire safety.

Smoke extraction fans

The range of smoke extraction fans includes the main types of equipment that are most in demand today. Among them:

• smoke removal fan VKRV-DU – upward air emission;
• smoke removal fan VR-DU – radial smoke removal fan.
• smoke removal fan VKR-DU-S - air flow discharge to the side
• smoke removal fan VKR-DU-V - upward air emission

All smoke removal fans (smoking fans) have a fire resistance limit of 2 hours at temperatures of 400C and 600C.

Thanks to cooperation with foreign partners in the supply of wheels for smoke extraction fans, we can confidently say that our equipment has guaranteed reliability. In addition, the use of a German impeller in VKT smoke extraction fans gives the product high aerodynamic characteristics. In our production, we use the most modern equipment, in particular, smoke exhaust fans are manufactured using CNC laser complexes.

The production time for smoke exhaust fans (smo fans) is also the fastest on the Russian market - 5 days.

Equipment for general ventilation

In recent years, Russian investors and customers have been pursuing a policy of minimizing costs. That is why the demand for domestic climate control equipment has increased significantly. VKT production is today considered one of the most high-tech in Russia. The plant is equipped with machines from leading European manufacturers, which guarantees the quality of manufactured products.

The range of equipment manufactured in this direction is very wide:

• round channel equipment

• Our clients are companies with completely different levels of demands. This became possible due to special conditions offered by the company:

  • low price for supplied equipment;
  • delivery in Moscow (from 30,000 rubles) and to the transport company is free;
  • flexible system of payment and discounts;
  • short terms for any non-standard equipment (from 3 working days);
  • individual approach to each customer.

IN THE CATALOG

Production

Ventilation equipment VKT (VKT) - This is Russian high-quality equipment.

VKT ventilation equipment since 2004 and to this day it is one of the most modern and high-tech in Russia. When creating VKT equipment, the experience of foreign production in Germany, Switzerland, Sweden, Italy, and France was used.

VKT production is equipped with equipment leading world manufacturers such as AMADA (Japan), FINNPOWER (Finland), KUKA (Germany), SPIRO (Switzerland), TRUMPF (Germany), which allows us to manufacture products with high precision and in the shortest possible time. Constant modernization using innovative approaches allows the use of advanced industry technologies.

Use of high-quality foreign components, well established in the global ventilation market - AROSIO (Italy), BELIMO (Switzerland), KLINGENBURG (Germany), MIBEX (Germany), MATRA (Italy), NIKOTRA (Italy), SIEMENS (Germany), ZIEHL-ABEGG (Germany) and others, allows us to guarantee the high quality and reliability of VKT products, which is confirmed by the necessary certificates.

Ventilation and fire-fighting equipment VKT is produced at 2 modern factories with a total area of ​​over 20,000 m2.

Measures are constantly being taken to improve the design equipment, the range of products is expanding.

Along with traditional equipment, the latest developments of the VKT company are presented here - for example, axial smoke removal fans VO-DU, radial smoke removal fans VR 280-46-DU, axial fans VKVO, as well as new modifications of the fan VR 80-75-DU, VKP and compact VKJet installations.

Over 11 years of work ventilation and fire-fighting equipment VKT has taken a worthy place in the Russian market, serving people at facilities for a wide variety of purposes - from cosmodromes to shopping centers, from factories to residential buildings.

In addition to the Russian Federation, VKT equipment is used at facilities in the Republic of Belarus, Ukraine, Kazakhstan and abroad.

Equipment

Today VKT produces:

Rectangular duct fans VRPP and VIP
Rectangular duct fans VIPm
Duct fans for square ducts VRKK
Duct fans for round ducts VRKK
Duct fans with a remote electric motor “kitchen” and corrosion-resistant VRPV-N, VRPV-N KH and VRPV-N KR
Duct fans with a remote electric motor “kitchen” and corrosion-resistant VRPN-N, VRPN-N KH and VRPN-N KR
Explosion-proof, acid-resistant duct fans VRPN-N VK, VRPV-N VK

Read more...

Radial fans
Low pressure radial fans VR-80-70
Medium pressure radial fans VR-280-46
Medium pressure radial fans “dust” VR-140-40
High pressure radial fans VR-120-28

Roof fans
Radial roof fans VRKO
Radial roof fans with reduced noise level VRKSH
Roof axial fans with reduced noise level VOKSH

Axial fans
Low pressure axial fans VO-12-300
Medium pressure axial fans VO-25-188
High pressure axial fans VO-30-160

Heating and ventilation equipment
Composite ventilation units SVAN
Composite ventilation unit АВС
Mounted heating and ventilation unit NOVA
Mounted heating and ventilation unit modified NOVA-M

Air curtains ZVV
Air curtains ZIS
Air curtains ZVSh ("Klim")

CENTRAL AIR CONDITIONERS
Frame central modular air conditioner KKTSM
Frame central modular air conditioner KKCM. New line

HEAT EXCHANGERS

DRY COOLERS (DRY COOLERS)

EQUIPMENT FOR SMOKE VENTILATION SYSTEMS
Fans for smoke control systems
Smoke extraction fans
Smoke removal fans VKRN DU
Flare smoke removal fans VKRN-F DU
Smoke removal fans VKRV DU
Double smoke exhaust fans VKRV2x DU
Axial high-pressure smoke removal fans VO-45-130 DU
Axial roof smoke removal fans VO K DU
Axial smoke removal fans VO DU
Wall-mounted smoke extraction fans VRP DU
Radial smoke extraction fans VR-80-70 DU
Radial smoke exhaust fans VR-280-46 DU
Fire and smoke valves
Pressure fans
Pressure fans UVOP
Roof boost fans KVOP

EXPLOSION-PROOF EQUIPMENT
Explosion-proof design of duct fans, smoke removal fans, air curtains

ACCESSORIES FOR INSTALLATION OF FANS
Mounting glasses. Sound-attenuating mounting glasses
The mounting glasses are insulated. Round mounting glasses
Mounting glasses for KVOP. Installation of roof fans
Check valves KG, KL
Check valves KO. Pallets
Accessories for wall fans
Vibration isolators for radial fans
Flexible inserts

AUTOMATIC CONTROL SYSTEMS
Fan control system SHUV
Low power fan control system SHUV-Mod
High power fan control system SHUV-2s
Control system for air-handling unit with water heating SHAUP-V
Air handling unit control system with step-by-step control of electric heating power SHAUP-E-3ST
Air handling unit control system with smooth regulation of electric heating power SHAUP-E-S
Control system for air supply units SHAUK
Dispatch and remote control system based on SHAUK-F-M168
Control system for mounted heating and ventilation unit NOVA SHAUN-V
Dry cooler control system SHAUN-V-GS
Air curtain control system with water heating SHAUZ-V
Water-heated air curtain control system SHAUZ-V-Mod
Electrically heated air curtain control system SHAUZ-E
Air curtain adjustment unit RUZ
Heating control unit RUN
Cooling control unit RUKH

Today it is difficult to imagine working in an office or factory without good air exchange. Performance drops sharply in the absence of ventilation systems in our lives. In a closed room, your health worsens, drowsiness and headache appear. Organizing air exchange, cleanliness, and maintaining the required air temperature are essential items.

Building ventilation systems is not an easy task and requires engineers to have extensive knowledge in the field of designing ventilation systems. Every year, new solutions and new ventilation equipment appear that allow us to save energy, choose an air purification class, and control the entire system from a mobile phone.

Ventilation equipment for ventilation systems
Here we present the basic elements for creating a forced ventilation system for both residential and commercial premises. Compact air handling units with a heat recuperator are ideal for placement in an apartment or private house. Industrial ventilation systems and stacked duct systems are selected individually for each room.

All ventilation is divided into several types:

• natural ventilation
• forced ventilation

The most effective ventilation system is considered to be forced, as it allows you to supply the required amount of fresh air into the room. The supply air can be heated, cleaned or cooled, and also, thanks to the recuperator, the exhaust air can be used as a heater. This ventilation equipment can be hidden behind a suspended ceiling or in a special room.

Exhaust ventilation is also considered important, as it allows you to pull polluted air out of the room and, through natural ventilation ducts, bring in fresh air. Such systems are used in restaurants and in production where this process is very important for human performance or rest.

Note
All systems, whether supply or exhaust ventilation, do not work without correct calculation and proper installation. The installation of ventilation systems and the routing of air ducts must be carried out by qualified specialists with practical experience in carrying out the work. You can order ventilation equipment in our store at a competitive price without any doubt about its quality. You can see the estimated cost of installing ventilation systems in the section.

Smoke extraction fans (SD)

One of the most important activities of the company VKT is production and sales smoke extraction fans . We offer the client equipment at the level of European analogues.

Currently, there is particular interest in smoke ventilation. This is due to the approval of new regulatory requirements, which are set out in the “set of rules 7.13130.2009. Heating, ventilation, air conditioning. Fire safety requirements." When planning a smoke removal system, the main emphasis is on calculating the fan parameters and choosing the appropriate model from the range offered on the climate control market.

Under the brand VKT Several types of blower fans are produced, which differ in the design of the housing and impeller. Today on the Russian market the most common and popular models of smoke exhaust fans are roof-mounted radial fans and radial fans with a spiral casing

Roof radial fans are installed on the roof of buildings, as their name suggests. This is an important advantage and a huge advantage of this type of fans, since the need to install special ventilation chambers for smoke removal automatically disappears, and it becomes possible to expand the usable area of ​​production premises.

Smoke extraction fans for various functional purposes are produced under the VKT brand: