What can be made from remnants of soap. How to make soap at home from scratch step by step: a few recipes? The easiest way to make DIY liquid soap

Rarely do you find such perfect cleaners who manage to wash off the entire bar of soap to the bitter end. Most often, small pieces remain - remnants. And what do you want to do with this treasure?

Source

There are several answers to the question what to do with remnants .

We offer these options:

1. Make new soap from remnants. You can make both liquid soap and ordinary solid soap. Below is the recipe for how it's done.

2. You can add old soap to new. It's done like this: Soak a piece of new soap in water and "print" a remnant of soap into it. For greater strength, you can wrap the resulting bar of soap with cellophane and place it in the microwave for 10-15 seconds. Two different soaps will stick together tightly and become one piece.

3. Let's make bubble bath. To do this, rub the remnants on a grater and add baby oil to the soap chips. The resulting mass will successfully replace the usual bath foam.

4. Washcloth for garden and garage. As you know, after fussing in the garden and repairing the car, it is very difficult to wash your hands. A special washcloth made of remnants and a plastic mesh from vegetables or fruits, for example, from garlic, will help here. If you put the remnants there and tie it up, you get a strong washcloth that will help you quickly wash your hands even after the dirtiest work in the garden and in the garage.

5. Remnants will help to better wash clothes and make it more fragrant. Only for this you do not need to put soap in the powder compartment. Instead, put the remnants in an old sock, tie it up well, and put it with the rest of the laundry in the wash.

6. You can use a bar of soap instead of a pincushion. We will stick there all the needles and pins available in the house. As a result, our needles are in order and clean. For beauty, put the soap in some pretty case.

7. We put small pieces of fragrant soap in drawers with linen, and as a result, our things will smell nice.

8. The remnant will perfectly replace the chalk: they can draw marks on fabric and even on pieces of wood, where you need to cut it off.

9. Putting the remnants in a linen bag, we get an excellent washcloth.

So now you can not suffer, lathering with small pieces of soap. Put the remnants in some box and save them for later use. And you can always throw away...

Source

Old soap makes wonderful new. If you successfully choose the colors and smells of the remnants, then your soap will turn out better than ever!

Soaps can be used to make two types of soap: liquid and solid.

With liquid everything is very simple: we push remnants into a bottle of old liquid soap (preferably with a dispenser, for solidity), about half a bottle, pour hot water and ... wait.

Periodically shake the bottle and mix its contents.

After a few days (it all depends on your remnants: some soap dissolves faster) you will have a bottle of liquid viscous soap. If the soap mixture seems too thick, dilute it with water.

Solid soap from remnants

To prepare it, we need a plastic container suitable for heating in a microwave, in fact, the microwave itself and molds where we will pour the finished soap.

Step 1. Three remnants on a coarse grater or chop with a knife into small pieces.

Step 2. Put them in the prepared plastic container and add some hot water. If you want to get multi-colored soap - lay out the remnants in different containers, without mixing one color with another.

Step 3. Close the container with remnants of the lid and put in the microwave for 15 seconds. Then take it out and mix. We put again. And so we do until the soap melts. Try not to bring the soap to a boil.

Step 4. Before the final “heating”, you can add various oils, oatmeal, ground coffee, flower petals to the soap ... So you will not just have a recycled soap, but a new useful and beautiful product.

Step 5. Lubricate the soap molds with oil and pour the melted mixture into them. You can make soap with several layers. To do this, first pour melted remnants of the same color, let the soap dry a little, and fill in the second batch of a different color.

For molds, tin cans are suitable (when the soap dries, we just cut off the bottom of the can and push the soap out), sand molds for children, pastry molds for cupcakes ...

The soap should dry out for a few days. Well, then you will have your own soap made from remnants.

Two types of soap can be prepared from remnants: and solid.

With liquid everything is very simple: we push remnants into a bottle of old liquid soap (preferably with a dispenser, for solidity), about half a bottle, pour hot water and ... wait.

Periodically shake the bottle and mix its contents.

After a few days (it all depends on your remnants: some soap dissolves faster) you will have a bottle of liquid viscous soap. If the soap mixture seems too thick, dilute it with water.

Solid soap from remnants

To prepare it, we need a plastic container suitable for heating in a microwave, in fact, the microwave itself and molds where we will pour the finished soap.

Step 1. Three remnants on a coarse grater or chop with a knife into small pieces.

Step 2. Put them in the prepared plastic container and add some hot water. If you want to get multi-colored soap - lay out the remnants in different containers, without mixing one color with another.

Step 3. Close the container with remnants of the lid and put in the microwave for 15 seconds. Then take it out and mix. We put again. And so we do until the soap melts. Try not to bring the soap to a boil.

Step 4. Before the final “heating”, you can add various oils, oatmeal, ground coffee, flower petals to the soap ... So you will not just have a recycled soap, but a new useful and beautiful product.

Step 5. Lubricate the soap molds with oil and pour the melted mixture into them. You can make soap with several layers. To do this, first pour melted remnants of the same color, let the soap dry a little, and fill in the second batch of a different color.

For molds, tin cans are suitable (when the soap dries, we just cut off the bottom of the can and push the soap out), sand molds for children, pastry molds for cupcakes ...

The soap should dry out for a few days. Well, then you will have your own soap made from remnants.

In addition, you can do it, however, it will take a little more components and time.

An experienced housewife will always find a use for any old thing, including she always knows how to make soap from remnants. Most people consider them useless and just throw them away. But connoisseurs of home soap making, lovers of sewing will always find a use for even the smallest pieces of soap. How to cook soap from remnants at home?

How to make a new product out of remnants?

Old soap bars can be used to make not only a new solid bar, but also liquid soap. This is the easiest way as it only requires hot water.

Boiled soap does not require molds, it can be stored in any bottle. During preparation, new soap can be flavored to your liking.

1. The standard method is to mix 1 cup of bar soap and 10 cups of water. The remnants are rubbed on a fine grater. The smaller the chips, the faster it can disperse in water. If the bar of soap is very dry and difficult to rub on a grater, you can crush the bar with a hammer. The resulting chips should be poured into an enameled pan and poured with water. Put the pan on a slow fire and stir constantly. Continue the cooking process until the chips are completely dispersed. As soon as the composition becomes one, the pan is removed from the heat. A slightly cooled mixture can be poured into bottles.
2. Liquid soap can be prepared not only by boiling, but also by infusion. For this, about 50 gr. soap shavings is poured with a liter of hot water. The container is tightly closed, and the mixture is infused for two days.

Soap during the cooking process has an unpleasant odor, but you should not immediately add a large amount of flavors. After the soap mixture has cooled, its smell will change. If essential oil is added to the product, it is not recommended to pour more than 10 drops of it!

How to cook soap from remnants in solid form? The method of preparation is similar to obtaining soap in liquid form. The difference is that soap chips and water are taken in equal proportions. The process will require forms. For soap, you can use silicone molds or purchase specialized ones.

There are several options for how to make soap from the remnants of your own hands. It can be boiled, or you can simply infuse the shavings from the residues in water.

1. Grate the remnants on a grater, the smaller they are, the faster it will be possible to achieve the desired consistency.
2. Place the shavings in a container and fill with water. It must be infused for several hours to soften.
3. Next you need to add olive oil. For 200 gr. remnants need one tablespoon. The resulting mixture is put on a slow fire and constantly stirred.
4. When the chips are completely dissolved, you can add any additives to the soap. The mixture must be stirred and allowed to warm up.
5. After the pan is removed from the stove, you can add essential oils.
6. A mixture of soap from the remnants is poured into molds and put into the refrigerator. After a day, you need to check if it is ready. To do this, press on the surface with your finger. If no trace remains, then the piece can be removed from the molds.
7. After that, the pieces need to be dried. They are laid out on a clean sheet of paper and left in a dry place for a week.

From small multi-colored pieces you can make one curly. For example, you can make a rose with petals.

To do this, you need to make pieces in the form of a rose and green petals. Connect the rosette and leaves and glue one to one. Please note that essential oil must not be poured into a hot mass. Under the influence of high temperatures, essential oils evaporate quickly, and the effect will not be achieved!

You can also make a whole piece of remnants with your own hands in the microwave. How to cook soap according to this option?

• mix the remnants in a volume of one liter with a glass of hot water. Everything is placed in a special container and sent to the microwave;
• you will need to digest the mixture for half a minute with a power of 600 watts. After that, the dishes are taken out and the soap is allowed to cool slightly;
• then turn on the microwave again for 15 minutes. The procedure is continued until the remnants are completely dissolved.

It is very important during the cooking process to ensure that the mass does not boil! The made soap is poured into molds and placed in the cold for two days.

Various ingredients can be added during cooking. For example, saffron, calendula or curry. They will give the product a yellow color. A red tint can be achieved with chamomile essential oil. In addition, you can tint red with beet juice. And if you use milk, then the soap will turn out to be a beige shade. Important to remember! If food ingredients are added to the mixture, the shelf life of such a piece is reduced. In addition, before use, you must make sure that there is no allergy to the components.

Remnants can be useful to an experienced hostess not only for drawing patterns. Making new pieces from the leftovers can become a real hobby.

Despite the recent emergence of gels designed for showering, many people use ordinary soap in the old fashioned way. It costs less, and today you can buy a similar product with any smell and any color. Therefore, most houses accumulate small remnants from time to time. You can, of course, just wrap them in a cloth and use them to wash dishes, tiles or linoleum, or throw them into the washing machine. But you can do it differently. In this article, we will consider, from remnants. There are different technologies for its manufacture.

Making liquid soap

In order to get a liquid detergent, in addition to the actual remnants, you will need:

• Bottle with dispenser.
• Glycerin (sold in a pharmacy).
• Lemon juice.

The bottle will need to be rinsed with hot water. The pieces are rubbed on a fine grater. Pour a little lemon juice and a cap of glycerin into the bottle. After that, grated soap is poured and everything is poured with hot water. All ingredients must be mixed well. Such soap made from remnants should stand for several days (2-3). Shake it well before use.

Solid soap in a water bath

As in the first case, the remnants are rubbed on a grater (this time it is possible on a large one). After that, they are put in some kind of metal vessel and a little water is added. Its amount depends on the number of rubbed remnants. You do not need to add too much, otherwise the finished product will dry for a very long time. The mixture should not be especially thick either.

The cup is placed in a water bath and the grated pieces are waiting for the melting. To make high-quality soap from remnants with your own hands, it is necessary to remove foam from the surface from time to time. Do not stir the composition, otherwise bubbles will appear. You don't even need to bring it to a boil.

Forms must be prepared in advance. From the inside, they should be smeared with some kind of fat. You can take molds designed for making cupcakes, or toy children. The melting time of grated soap depends on its type and quantity. Once everything is ready, the mixture is poured into molds and left to dry in a dry, warm room. After a few hours, the resulting pieces can be pulled out. Within a couple of days they will dry out.

Melting over gas

So, how to make soap from remnants in a water bath is understandable. There is absolutely nothing complicated about this. However, for those who find steam melting too lengthy, you should use a slightly different method. A cup with grated remnants can simply be held for a few minutes above the gas (at a height of 3-4 cm from the fire). Before the mixture melts, the metal does not even have time to heat up especially.

Another way

Next, consider how to make soap from remnants in the microwave. The pieces are also rubbed on a grater, put in a bowl, poured with water and put in the oven for 15 minutes. After that, take out and mix. Then they are again placed in the microwave (for the same time). Then again take out and mix. This process is repeated until a completely homogeneous mass is obtained. Usually five heatings in the oven are enough. The resulting mixture, as in previous cases, is poured into molds.

Soap "pie"

Now let's see how to make exclusive and beautiful soap from remnants. To do this, you need the source material of different colors.

Some of the remnants are cut into small pieces, and some into large ones. They will need to be mixed and sprinkled liberally with alcohol, achieving sticking. Separately, melted (you can use one of the above methods) transparent soap is poured into the mold. The prepared sticky colored layer is placed in the container. After the base dries, the resulting soap is pulled out of the mold and cut into pieces.

How to make soap from remnants, you now know. However, if simple pieces are melted and dried, the finished product will not have any smell. In order to correct this situation, at the last stage, some aromatic essential oil should be added to the mixture (best of all, since eau de toilette or something like that will simply evaporate). At the same time, you can also add a little dye. Of course, you shouldn't use chemicals. It is better to take some food. To prepare scrub soap, also at the last stage of cooking, you need to add regular ground coffee to the composition.

You can also try making soaps that are good for your skin. To do this, powdered dry lavender or mint is placed in a heated solution. In summer, you can also put finely chopped freshly picked herbs. It can be mint, lemon balm, Bogorodskaya grass, chamomile, St. John's wort, etc.

If you do not have suitable molds, you can simply glue or fold a box of plain paper. Of course, the finished soap will not work out especially beautiful. However, it will be possible to give it the desired shape by simply turning the bar with an ordinary knife. Those who have already tried making soap at home also believe that it is not necessary to grease metal and plastic containers. In this case, the surface of the bars is smoother, without "shells".

So, now you know how to make soap from remnants. All of the above methods are not at all difficult to perform. You can use any of them. Of course, before cooking a new soap, household remnants should first be selected and removed. Otherwise, the smell of the finished result, even with the addition of flavors, will not be very good.