What can you make a dinosaur from? World of Dinosaurs from Waste Material

Recently, Anya (4.8 g) and I made a real world of dinosaurs with our own hands from waste material.

With caves and a tunnel, ferns and a lake, and most importantly, an active volcano.

The idea of ​​​​creating a world of dinosaurs came to us after attending a thematic lesson on dinosaurs, held at a local children's intellectual center. Anya was very impressed by the volcanic eruption, as one of the versions of the death of dinosaurs.

I thought for a long time about how to make a game world of dinosaurs with an active volcano. Then somewhere on the Internet I saw something similar to what I would like to see, and I liked the idea of ​​​​using plaster to create a relief.

So, here's what we got:

The world of dinosaurs from waste material. Step-by-step master class

To create a world of dinosaurs you will need:

— paper/newspapers;

— plastic bottles and plastic jars;

- masking and regular tape;

- foil;

— gypsum plaster (rotband);

— acrylic paints;

- solid base.

As a basis, we took a piece of plywood: an unnecessary piece of the back wall from furniture.

Step 1. Prepare the main objects of the dinosaur world

Volcano. Cut up plastic bottle, unscrew the lid. I made the bottom of the volcano from the lid of a disposable plastic round container. It fit the bottle size perfectly. I simply inserted the bottle into the cap and covered it with tape on all sides.

Caves. One cave is made from the bottom of a plastic bottle - we cut off the required height from the bottom of the bottle and cut an entrance.

For another cave, I took the top part of a 0.5 liter bottle and cut off the neck. It turns out something like a tunnel: now we cut off the bottom of this tunnel and we get a cave. We cover the place where the neck was with paper and seal it with tape.

Tunnel. We used the remaining piece from a 0.5 liter bottle as a tunnel.

The edges of caves and tunnels – where there will be an entrance/exit – need to be covered with tape so that the child does not get hurt when he plays.

Lake. Initially we planned to make a lake into which we would pour water. For this we found a plastic deep plate. But it turned out a little differently. More on this below.

Step 2. Making the base for the world of dinosaurs

Since in the world of dinosaurs there will be an active volcano (and this is moisture), for reliability I covered the base on all sides with tape.

Then my daughter and I thought about the placement of the main objects of the dinosaur’s world, and secured them with masking tape on the outside (the caves were also glued to the base on the inside with transparent tape).

The base for the pond was “fashioned” using paper, foil and masking tape. To do this, they put a plate, covered it with crumpled paper, secured it with tape, covered the paper with foil, and secured it with tape again.

Attention! The resulting structure will be strengthened with plaster in the future, so it needs to be done with plenty of space inside. We didn’t take this into account, and the plate simply didn’t fit.

We placed the volcano inside a plastic substrate (in which cookies are sold). The backing itself was glued to the base with double-sided tape. We need a substrate so that the lava from the volcano does not spread throughout the dinosaur world.

Step 3. Create the terrain in the world of dinosaurs

After all the main objects of our dinosaur valley are placed, we begin to form the relief: slopes, lowlands, elevations. We make the caves and tunnels more sloping, and form a cone from a bottle for the volcano.

For this we need foil, paper and double-sided tape. The paper is crumpled or folded - and placed where the protrusions will be, we secure the structures with molar tape. The pictures clearly show how we did it.

At the end, we cover the paper with foil (so that the plaster does not soak it) and also strengthen it with molar tape.

When everything is ready, spread the gypsum plaster and, using a wooden stick or small spatula, cover all surfaces of the dinosaur world with it. It is best to dilute the gypsum a little at a time so that it does not dry out.

At this stage, you need to install and secure the plants with plaster. Our trees came in a set with the dinosaurs themselves, but if you don’t have them, you can buy ordinary plants for the aquarium. We also added ordinary stones found on the street.

Now the world should dry out thoroughly for our dinosaurs. It took us about 3 days to dry.

Step 4. Color the world of dinosaurs

We used acrylic paints. They are durable and do not wash off with water. We only had four colors: red, yellow, blue and white. And we needed brown and green. We had to mix colors and choose the one that suited us. It was fun. Here it is, unnoticeable. By the way, the book “Blots-Malyaks” helped us a lot. We read it a long time ago, but the knowledge came in handy.

All, The world of dinosaurs is ready.

In place of the lake, we made a dry pool and filled it with beans. I wove a nest from willow twigs, and Anya put beans - eggs - in it.

And of course we launched a real volcano!

There are many things you can come up with with dinosaurs. exciting games, and even conduct experiments and experiments. Check out our big one. These are games that my daughter played repeatedly over the course of about a year :). Another idea for creating a world of dinosaurs in the form of.

Find out how to make a dinosaur out of paper and plasticine. And for the celebration, you can bake a cake in the shape of a lizard or create a decoration from mastic and decorate pastries with it.

The content of the article:

Children tend to show interest in the unknown. They love stories about animals that you can no longer see even in the zoo. Some kids want to know how to make a paper dinosaur so they can make one. If you bake a birthday cake in the shape of this animal or decorate a dessert with it, the child and his little guests will be indescribably delighted.

Fondant cake decoration in the shape of a giant reptile

Read how to make a dinosaur out of fondant and make it a delicious cake with this character.

If the child is a teenager, then he will like these reptiles. For kids it is better to make more friendly ones. And data is made of mastic. For the provided cake, 3 sponge cake layers were baked. The lower one is in a wide low shape. The other two are in shapes of smaller diameter, but tall. After this, each of the top cakes is cut horizontally into 3 parts, which are coated with cream.

Then all the floors of the cake are covered with fondant of a certain color. After this, the dinosaurs are glued using:

• squirrel;
• water;
• or food paint.

To make the dinosaur that is located below, you need to drop a little orange or yellow food coloring into the white mastic, spread the mass out, and then roll it out into a layer 5 mm thick. You will also need brown mastic, from which we create a pattern on the back, tail and legs. To make decorations from mastic in the form of animal claws, use the white mass, as you would for the teeth of a green reptile.

To mold them, cut a strip from a thin layer and make teeth in the center with a knife. Divide the workpiece in half - you have teeth for the upper and lower jaws of the animal. For his body, you need to drip a little green food coloring onto a lump of mastic, knead it, roll it out and cut out the shape of the animal according to the template. Below are two. Choose any one and use it as it.

If you don't have food coloring, use carrot juice instead of orange. Green will replace spinach, and red will replace cranberry.

Homemade mastic should dry for a day or even two in the air, after which the cake can be used for its intended purpose.

Mastic dragon - 3 examples of sweet creativity

A child can easily make a reptile together with his mother. Dinosaurs are molded from plasticine in the same way as from mastic. Children will be interested in creating these animals from the sweet mass, because then it will be so nice to eat the result of their labor.

Here the dinosaur is blue, but you can use any other color. First let the child roll 2 circles - one smaller, the second larger. Now they need to be connected, placing the small one on the large one to form the body of the beast. Mark the upper part of his hind legs with a knife or a thin stick and stick triangular legs down and also 2 up, attach the tail.

Next, an oval is molded for the head, the nostrils and nose of the reptile are indicated with a wooden stick. From small volumetric triangles you need to make “spikes” from the head to the tip of the tail. Now you need to dry these cake figures well at room temperature so that they do not “float” later, and you can decorate the baked goods.

See how to make a dinosaur cake. This could be a dessert dedicated to fairy tale character, so similar to this one. Read how to make a dragon, which you can and should then eat.

Biscuit dough was baked for it, and butter cream was prepared from the following products, used:

• 1 egg;
• 250 g butter;
• 200 g sugar;
• 150 ml milk;
• 1 packet of vanilla sugar.

First, you need to mix the egg in a saucepan with milk and sugar with a whisk. Put on fire, bring to a boil, cook for 5 minutes, stirring constantly. Cool. Then, add the milk mixture one spoon at a time to the whipped butter, continuing to beat.

You need to apply cream to the first layer, cover it with exactly the same biscuit, which is smeared with jam. Place the third cake layer on top in the shape of a dinosaur. Lubricate it generously with butter cream.

If you prefer chocolate, then add instant cocoa to it when cooking the cream. If you use regular milk, first stir it with warm milk, then pour it into the boiling mass.

Place a piece of biscuit on the back and head of the character.

Do not throw away the cake scraps. Grind them and mix with cream. Laying this mixture on the base of the cake, form a complete dinosaur out of it.

Now cover the figure, except for the head, with a layer of green mastic. Cover with cling film and refrigerate overnight.

In the morning, take out a homemade cake, cover the animal’s head with fondant, and decorate it as your imagination tells you.

Now you know how to make a dragon so that it turns into a cake. If you want to make a dinosaur out of mastic, look at a simple example.

This cake will take everyone who contemplates it back many thousands of years. Create a corner of nature from that time. Here's how to decorate a cake at home so it looks like it was baked by a famed pastry chef.

For him take:

• mastic;
• food paints;
• molds;
• silicone rolling pin;
• marzipan mass.

Place a sheet of mastic on the cake coated with cream and roll it over the surface with a rolling pin. Now tear off pieces of marzipan and place them on the sides of the cake in the form of pebbles. If you don't have that kind of dough, you can bake a chocolate buttercream cake and use that.

Now you need to roll out another layer, coloring it green. Cut out the edges with a zigzag, make a depression in the center, slightly to the side, for the lake, using a pastry iron or reverse side knife

Now, this is how to make a dinosaur out of brown mastic: we sculpt its body with a tail, then attach the legs, and make small details. Create flowers from mastic, and give the leaves texture using molds.

Write with fondant who the cake is addressed to and after drying, hand it to the birthday person.

Now that you know how to make a dinosaur from mastic, you can explain to your child how to create one from other materials. The manufacturing principles are largely similar.

How to make a dinosaur from plasticine?

The figure shows what parts a large and small animal consists of. We sculpt the body in the form of an oval. The tail looks like a long cucumber, the tip of which needs to be sharpened. For the head, a piece of plasticine must first be rolled out into a “sausage”, then bent on one side so that the head appears on the neck.

For the lizard's legs, let the child knead the plasticine, roll 4 ovals out of it - 2 are slightly larger - these are the front legs, and the other two will be slightly smaller than these - these are the hind legs. The claws for one paw are made from three small lumps of plasticine.

All that remains is to collect all the details and finish the educational lesson. If you don't want to complete it, then read how to make a dragon to look like a cartoon character. It can be molded not only from plasticine, but also from polymer clay, from mastic.

This master class has prepared already numbered photos for you. Looking at them, you can carry out all the steps in the given order and make a dinosaur out of plasticine.

Here's what you need to have with you for this craft:

• blue or other colored plasticine;
• small balls - 2–3 pcs.;
• plastic knife;
• toothpicks;
• hook;
• beads.

Mash the blue plasticine.

If you do not have blue plastic mass, use any other plasticine, taking material of your favorite color.

Roll out the plasticine into a pancake shape and place a ball inside. Close the hole. In front of this blank, mold a nose.

Also, using the second ball, make the body of a charming dragon. Then sculpt his paws. To make them flat at the top, press this part with your hand or with a small ball. Mark your fingers with a knife.

Use it to create a couple of folds on the back. Attach the hind legs and tail.

Let's take care of the animal's head. Using a hook, outline his mouth and nostrils. Create indentations for the eyes by pressing a bead here. The eyes consist of white - these are 2 larger balls and a pupil - a smaller circle.

For the upper eyelids, thinly roll out the plasticine of the desired color, give it a triangular shape, and round the lower corner. Reattach the eyes. This can be done using pieces of a toothpick and a small button on the stem, securing the eye sockets to it.

The steps for making the front paws are given in the following pictures.

Attach them and start making wings. For each, a three-dimensional triangle is molded, then you need to decorate the veins, as in the photo. Wrap 2 beads with pieces of plasticine, attach them to the wings, and the other side to the back.

This is how dinosaurs are made from plasticine. If you want to make them differently, check out these cool ideas.

Create a dinosaur from cardboard and paper

Origami is a very interesting type of needlework. By folding the paper in a certain way, you will get a lizard. How to make such a dinosaur using the origami technique from paper, diagrams for beginners will help them not get confused. Explanations will also make things easier.

For origami, take thick paper. It should be double-sided, that is, it should be painted in some color from the front and back.

Roll it diagonally first. Then bend 2 corners as done in the second picture. In this case, the edges will be on the diagonal line. The photo shows how the dinosaur is then made according to the origami principle. You can also watch a video with step-by-step making of a reptile at the end of the article.

If you want to go with an easier option, check out the following. This lizard was made from thick paper - cardboard.

Draw the outlines of the body, legs, and spines of the future dinosaur on cardboard and cut it out.

Make 2 cuts on the abdomen, insert a pair of legs into each. Then make several small cuts on the back for the spikes, which must also be installed on the body.

Carnival lizard masks

Speaking about how to make a dinosaur, it is worth noting that you can turn any person into one for a while, and also use unexpected materials to create a dinosaur. Look how interesting the plastic canister was carved to become the dragon's head.

Only 3 items helped create it, these are:

• canister;
• felt-tip pen;

First, draw a hole for the mouth and teeth at the bottom of the container. On the side at the top, near the lid - for the eyes, and on the side below - the nostrils. Carefully cut out these face details with a knife. You can make 2 more exactly the same lizard heads, attach them to metal or wooden rods with soft hoses on them, you will get an interesting sculpture for your dacha - a three-headed dragon. Its body can be transformed into a black trash bag filled with non-rotting material.

If you don't know how to make a dinosaur, and you need to make a mask of this animal, take:

• cardboard;
• scissors;
• white double-sided tape;
• newspapers;
• PVA glue;
• white cardboard;
• paints.

First, cut out the base of the mask from cardboard. Two large stripes will be the jaws of the lizard. The upper one is flat, and the lower one is rounded at the place of the cheekbones. These 2 parts are connected using a thin strip, which will be located on the back of the head.

Now measure the head of the person for whom you are making the mask with your own hands, cut another strip of cardboard along its diameter, and glue its ends together. Determine the area of ​​the head from the hairline to the back of the head, cut a strip of this size, and glue it in place. Using PVA, 2 horizontal fragments are attached to it, the upper edges of which must be glued to the top of the mask.

Let the glue dry, leaving the mask on until the morning. The next day, attach many strips of tape to it, creating eye sockets. Now you will make a dinosaur using papier-mâché technique.

Remove the top protective film from the tape and glue newspaper onto these strips. Take the second one and lubricate it with PVA. Glue to this one, then the next one, and so on, until the mask is tight enough. Now you need to let it dry thoroughly and only then paint it. When it’s dry, it’s time to go to a costume ball to show off your creation.

In the meantime, the mask is drying, we suggest watching the promised video:

The following story will be useful for children, as it shows how to make a dinosaur from plasticine:

Jonathan Reilly, who has been working in game development on AAA games and in cinema on special effects for more than 15 years, will talk about the secrets of creating a realistic dinosaur.

Creating such an extinct creature as a dinosaur required good preparation and a lot of references. Usually, when I create a monster, I rely entirely on flights of fancy.

The creature at the heart of this project once actually lived on our planet, so I spent quite a long time collecting a good library of references to make my dinosaur as realistic as possible, with real anatomy. Tyrannosaurus has always been my model for this extinct species, so when I was asked to recreate something similar, I went with it without hesitation.

01 Scene setting inMaya

For such projects, references are key.

After selecting a side reference of a dinosaur, I loaded it into Maya to use as a guide when creating the dinosaur basemesh. I assigned the reference as a texture to a plane with a planar UV scan along the X axis.

Then I made the image square for faster projection, and the material was translucent. I added the reference to the Display layer, for which I set the mode to Reference so that the image could not be selected in the Maya viewport.

02 Basemesh preparation

Start working on the dinosaur by extruding the faces of a regular cube, focusing on the reference

I started my 3D dinosaur modeling by creating a simple cube. Next, using extrusion, I created a silhouette of a dinosaur based on the reference. I modeled the basemesh using quads, not particularly worrying about small details, I only needed the overall volume. Try to distribute the polygons evenly at this stage, but do not go too deep into the details, which can always be added in ZBrush.

03 Working on details

Create a couple of spheres and place them in place of the eyes

Then I added a couple of spheres to the scene and placed them where the eyes would be. In my opinion, a basemesh always makes face sculpting easier. Next, I moved on to creating a language that was still based on an ordinary cube. Finally, when the basic dinosaur model was ready, I exported the result in .obj format to continue working in ZBrush.

04 Import toZBrush

Import the file in .obj VZBrush and split the mesh into separate subtools

I imported the .obj file into ZBrush. Then I split the geometry into separate subtools using the command Tool>Subtool>Split>Split To Parts. Next, I masked out the various parts of the dinosaur's body using ZBrush's selection tools (+ and click) and created polygroups for them using the Tool>Polygroups>Group Visible command. Thanks to this approach, you can conveniently work with individual elements of the dinosaur’s body.

05 Dinosaur blocking

Try not to pile on units unnecessarily

When working in ZBrush, it is important not to pile on divisions from the very beginning. At this point I just doubled the resolution of the mesh.

Using the Move, ClayTubes and Smooth brushes, I quickly sketched out the general shapes, being careful to take my time with the muscles. At the same time, I worked in symmetry mode on both sides of the dinosaur at the same time, which always speeds up the sculpting process.

06 Muscle training

Use polygroups to hide parts of the dinosaur you're not working on

I then used polygroups to hide the parts of the dinosaur that I wasn't working on. Again, using the Move, ClayTubes and Smooth brushes, I quickly outlined the muscles. At this stage, you can already start increasing the number of subdivisions, but I try to take my time, increasing the resolution only when it is really necessary.

07 Head detailing

Outline the brow ridges and jaw usingClayTubes

The head differs from the body in that it has less muscles, but the bones of the skull are present. In fact, the head is a skull with massive jaw muscles, which create such sharply defined shapes.

Brow ridges and the jaws I outlined using the ClayTubes brush. I masked the area around the eyes and used the Move brush to create indentations under the eyes. Then, again using polygroups, he isolated and carefully worked out the internal cavity of the mouth.

08 Body

Practice is a sculptor’s best teacher

Sculpting is a constant process of building up, smoothing and removing geometry, which is practically no different from working with ordinary clay. I created the volumes using the ClayTubes brush, then smoothed them with the Smooth brush, and sharpened the features with the Crease brush.

Thus, a sculptor, even a digital one, can create a finished product only through constant practice, working and refining the geometry until he begins to like it. At this stage, try to pay attention to how the muscles interact with the skeleton and with each other.

09 Skin texture

Now that the muscles are ready, it’s time to work on the claws and skin of the face, elbows, knees, etc.

Then I worked on the claws, folds, wrinkles and skin texture on the face, elbows, knees, etc. I sculpted a couple of skin folds on the neck, which I created with a Crease brush.

I softened wrinkles and depressions on the skin with a Smooth brush, trying to follow the natural direction of skin growth on the shoulders and collarbones. Next, I detailed the resulting geometry, increasing the number of divisions.

10 Klinap geometry

Duplicate the dinosaur's body and draw guidelines forZRemeshwhere you want a neat grid

After duplicating the dinosaur's body, I drew guidelines for the ZRemesh, outlining the mesh around the eyes, mouth, elbows, shoulders, hips and knees. I also drew guides around the tail so that the mesh wouldn't spiral in that area.

I tried not to forget and include symmetry to make the mesh more neat. I decided to stop at a polygon size of 15,000 polygons, and in a matter of seconds I got a neat dinosaur with a new topology.

11 CreationUV- sweeps

Creating polygroups for differentUV-shells

To create the UVs I used the UV Master in ZBrush. For the different UV shells, such as the head, mouth, arms, body and legs, I created separate polygroups by enabling the Color Painting feature in UV Master. This allowed me to mark the areas where the seams should be.

For the seams, I chose areas of the mesh that are not visible, such as the inside of the legs or skin folds. This way I got a development with seams in clearly marked places.

12 Additional work withUV

For better work WithUV-export by unwrapping.obj-file inMaya

I then decided to get more precise with the UV mapping and exported the file as an .obj file into Maya. I configured the UV shells so that the head and mouth were located on one UV sheet, and the body with legs on another. Next, once I was happy with the geometry and UVs in Maya, I imported the new base mesh into ZBrush. I still made the head a separate texture, since, due to the emphasis placed on it, it had to have sufficient resolution.

13 Transferring parts

Transfer detail from the old mesh to the new one

At this stage I needed to transfer detail from the old mesh to the new one. To do this, I duplicated the old subtool with the dinosaur body, made the UV subtool visible, and went down to the lower level of subdivisions of the original geometry.

Next, I used the Subtool>Project>Project All command to transfer the detail from the old mesh to the new one. Moved to more high level divisions of the old mesh and created a new one. Then I repeated this operation until the result began to suit me.

14 Small parts

INZBrush there are some useful alphas

ZBrush has some very useful alphas, but I personally usually use my own alphas, pre-created in Photoshop. With alphas I work with a Standard brush with intensity parameter 10 in DragRect mode, thus transferring details from the image to the geometry.

Sometimes, to increase the speed of work, I turn on symmetry in some areas, but with the head and body I try to work without symmetry, avoiding the “butterfly effect”.

15 Basic colors

Blocking a pass with primary colors usingPolypaintVZBrush

I always sketch out the main colors using Polypaint in ZBrush. In this case, it is better to paint the model before posing, since with this approach you can safely work with symmetry turned on, which significantly speeds up the work process. For basic coloring of geometry, the Standard brush in Color Spray mode, as well as Alpha No. 07, are quite suitable. The undoubted advantage of this approach is that you do not need to worry about seams, as, for example, when working in Photoshop.

16 MapSpecular

UsagePolypaintto create a seamless grayscale image

Polypaint can also be used to quickly create a seamless grayscale image, highlighting highlights and vice versa. These maps can later be easily exported to Photoshop using the Multi Map Exporter.

In addition, you can create a Cavity map, which can also be used to highlight finer details in the render.

17 Dinosaur posing

Posing is very important, so it's worth your time

The posing stage is very important, so you need to spend enough time on it. By this point, it is better to understand exactly how the character will be positioned, since this will significantly speed up the process of positioning him. So, I T-posed the character using Transpose Master, then masked and moved various elements of the model accordingly.

18 Texture maps

Creating a texture map with basic skin colors usingZAppLink AndPhotoshop

I used ZAppLink and Photoshop to create a texture map with the main skin colors. To achieve this map, I focused on the primary skin colors with a low Noise setting.

In addition, you can use references of elephant skin or, for example, rhinoceros, and then using ZAppLink, project the texture onto the dinosaur, without worrying about seams at all.

19 Baking textures

Bake the cards from the final model usingMulti Map ExporterVZBrush

Next, I baked the maps from the final model using the Multi Map Exporter in ZBrush. Baked Color, Cavity, Ambient Occlusion and Normal maps at 8k resolution. For the dinosaur I used two sets of texture maps, one for the body and one for the head (UDIMS).

20 MapDiffuse

Try to work inPhotoshop with a file in .psdwith unmatched layers

In Photoshop it is very convenient to work with an image in layers, storing the file in .psd format for a rainy day. With this approach, you can always make some edits to the image. As a basis, I took a texture with the main colors of the skin, on top of which I sequentially placed the Ambient Occlusion, Cavity and Base Color maps, adjusting the brightness, contrast and transparency if necessary. Try to work carefully and carefully at this stage so that you don’t have to fight with the light in the render.

21 Additional details

Create a small fake bump by copying the blue channel from the exported mapNormal

On top of all the layers I created a small fake bump by copying the blue channel from the exported Normal map. Then I adjusted the brightness, contrast, transparency and layer blending mode again. At the same time, I tried to remember that I had two different UV sheets that were supposed to be seamless, so any changes in one required instant changes in the other. I used the same principle to texture the tongue and eyes.

22 Finishing inPhotoshop

Improving the final image using filters

In Photoshop, I placed the KeyShot render of the dinosaur on top of the background image. I did some color correction on various layers and set the blend mode to Overlay and Multiply for some of them. Rendering efficiency can also be improved by using various filters, stylizing the image accordingly.

.

MUNICIPAL BUDGETARY PRESCHOOL EDUCATIONAL INSTITUTION« KINDERGARTEN No. 1 BEREZKA» VILLAGE OF MOSTOVSKY MUNICIPALITY

MOSTOVSKY DISTRICT

PROJECT “WORLD OF DINOSAURS”

Prepared by:

Potapova M.G.

teacher, higher education

qualification category

Project passport

Project type: "cognitive-research"

List of participants: 6 year old children, parents, teacher

By implementation time: short-term (2 weeks)

The work is devoted to the study of the life of dinosaurs. The theme was chosen due to children's interest in dinosaurs.

Project goals: 1. Study of the life of dinosaurs on earth

2. Development in children of the main components of cognitive activity and the cognitive sphere (thinking, attention, memory, imagination).

Project objectives:

1. Maintain interest in history

the emergence of life on earth.

2. Form cognitive skills:

observe, experiment, compare,

draw conclusions.

3. Develop artistic and creative

imagination, logical thinking.

Expected result:

Creating a “Dinosaur World” layout

Making a picture book “The Age of Dinosaurs.”

The encyclopedia “In the World of Dinosaurs” was brought to the group. During the examination, it turned out that the children had many questions about when dinosaurs lived, what they ate, and how they reproduced.

A plan for our work was drawn up, with the main ideas proposed by the children. We have identified areas of work and setproblematic issues:

"Who are dinosaurs?"

“What did dinosaurs eat?”

"How did dinosaurs take care of their offspring?"

“Are there animals like dinosaurs?”

In accordance with this, they stood outstages work on the project:

1. Motivational - informational

(posing a problem situation, creating motivation for teachers, accepting the task by children)

2. Design - productive

(Primary analysis of the problem, making assumptions. Selection of ways to test the assumptions put forward by children,

Testing these assumptions during the project.)

3. Reflexively - generalized

( Analysis of the assumptions of the results obtained during the implementation of the project and formulation of conclusions.)

4. Presentation of group, individual development, in the form of a subproject “The emergence of “Dino - Luntik”” by pupil Lera Shulzhenko and her family.

In accordance with the goals, objectives, stages of the project, and problematic issues, a variable form of comprehensive thematic planning was developed for the implementation of the project “In the World of Dinosaurs.” The following forms of work with children were used in the work:

Educational area"Cognitive development"

1) Classes

"Who are dinosaurs?"

Goal: to introduce children to the ancient inhabitants of the planet, their diversity and species.

“Journey to the Dinosaurs” was conducted in the form of an interactive excursion as a final lesson within the project, the purpose of which was to summarize the children’s knowledge acquired during the project.

2) conversation

"Dinosaur Children"

"What are dinosaurs like"

Goal: to identify a number of animals that currently exist and are similar to dinosaurs.

3) Experience and observations.

A wonderful toy “Growing Animal” has appeared in children's stores. All children really like it. This toy is a baby animal, in our case a dinosaur.

As an experimental activity, the growth of a baby dinosaur was observed.

Algorithm for conducting the experiment.

We looked at the little dinosaurs and touched them.

They made assumptions about how big the cub would grow.

Fill the glass with water.

They lowered the toy into the water. The water should completely cover the dinosaur.

We observe that after 16 hours the dinosaurs increased in size.

Add water.

We are watching the further growth of the dinosaurs.

Educational field "Speech development"

4) reading fiction and looking at illustrations in encyclopedias.

Looking at illustrations is a fascinating activity; it turns out that not all information can be gleaned from books. Several children learned poems about dinosaurs while completing a project.

Educational field "Social and communicative development"

From the first days of the project, children were involved in search activity, such tasks as:

"Feed the dinosaur"

"Find the dinosaur's mom"

For example, the group carried out a task of a situational nature: “Where is the egg? What’s in it?”, whose task was to develop skills joint activities with peers, communication skills, self-confidence. Children raking the sand find an egg. There is a small dinosaur hidden in the egg. The teacher offers to give him a name, say hello to him, and also names the type of dinosaur, what they are, etc.

Educational field "Artistic and aesthetic development"

It turned out that some children have toy dinosaurs at home. It was decided to create a general collection and use it for the Dinosaur World layout.

Work on creating the layout took place in subgroups. The 1st group constructed a volcano and mountains from paper and painted it.

The 2nd group worked on creating a plain for the layout, with trees.

The dinosaurs that we raised during the experimental activities were also placed on our model.

And Maxim, at home with his mother, made a dinosaur out of paper, which was also used to place him in the “World of Dinosaurs”.

IN
everything is ready! The work went quickly, guys with great desire they worked: they sculpted, painted, glued.

Also, as part of the project, the book “The Age of Dinosaurs” was created, in which children reflected the diversity of species of ancient reptiles - dinosaurs. The participants did this work at home with their parents.

To summarize, we can say that during the project, children gained knowledge about the life of dinosaurs, the book “The Age of Dinosaurs” was created, and a model “The World of Dinosaurs” was also made.

In progress project activities everything developed key competencies:

Social - communicative: children interacted with each other,

asked informative questions, argued, came up with riddles and fairy tales.

Informational – received information from different sources and shared it.

Active - we selected materials and tools to create a product.

Health-saving - played outdoor games: “Predators and Herbivores”, “Big and Small”. That’s why I consider the project “In the World of Dinosaurs” a success.

We suggest making a dinosaur craft with your children from paper and paper plates. There are 5 cutting templates to choose from, each of which is close to the real image of the animal. Creative activity will introduce your child to the most famous species of dinosaurs: Pterodactyls, Diplodocus, Stegosaurs, Tyrannosaurs and Triceratops.

Necessary materials:

• standard size disposable paper plates;
• printed templates on thick colored paper;
• doll eyes (in, in);
• scissors and stapler.

How to do

1. Cut a paper plate into two halves. Decorate in any way:

Method 1. Decorate with sparkles.

Source: thecrafttrain.com

Using a brush, apply glue to the surface and, placing a large sheet of paper, sprinkle dry glitter on top. Shake off excess and collect leftovers in a jar. Wait for the glue to dry or dry with hot air.

It is worth noting that glitter can add shine to absolutely everything it touches, and careless movement will scatter everywhere. Therefore, dry glitter is inconvenient to use in children's creativity. It is better to use glitter in the form of glue (gel) in convenient tubes (in, in).

If the option with glitter does not suit you, we recommend using paints, pencils or stickers.

Method 2. Draw with stamps.

You can work with ready-made stamps (in, in, in) or make your own by cutting them out of a dishwashing sponge.

For most patterns, it is best to decorate the outside of the paper plate, and for the pterodactyl, the inside. After painting, let dry for an hour.

2. While the plate halves are drying, print out the templates on thick colored paper and cut out the dinosaur parts: heads, paws and tails. Diplodocus is the easiest template to cut out with a child's hand. Others are quite complex and are best left to an adult.

3. Glue doll eyes to the dinosaurs or draw with a felt-tip pen.

4. Use a stapler to fasten all the parts. The dinosaur paper craft is ready!