From what items can silicone molds be made. How to make silicone molds with your own hands? Easily! Do-it-yourself sealant molds

In this article, we will discuss which silicone molds for mastic are presented on Aliexpress and how to use them.

If you are decorating cakes, then you definitely need to know that there are special mastic molds that will make you a first-class craftsman. confectionery. These tools can be purchased at Aliexpress, and they are quite inexpensive, and the range is huge.

Silicone molds on Aliexpress: catalog, photo

Molds on Aliexpress

Silicone molds are large flexible stencils that allow you to decorate confectionery. They are important assistants in the work of every confectioner when working with caramel, mastic, marzipan and chocolate. Some with the help of molds create wax figures or soap of the original form.

Silicone molds do not have any flavors, odors, and they are absolutely safe for health. Moreover, they easily tolerate any temperature.

When buying a mold, you will make the process of making a beautiful cake fun and save a lot of time. On the Aliexpress You will find a huge variety of interesting figures for your taste.

How to use molds for mastic with Aliexpress?

To start using the mold, you first need to prepare everything you need:

• silicone mold
• Mastic or sugar paste
• confectionery brush
• Corn starch
• rolling pin

So let's get started:

• First you need to thoroughly grease the form with corn starch.

• Now tap the mold a little to remove excess starch. You will be left with a thin layer that will not allow the mastic to stick.

• Knead the mastic so that it is flexible

• Next, you need to roll it into a cake using a rolling pin.

• If the mastic is too sticky, then use a little cornstarch
• Now place the mastic on top of the mold, press down and massage so that the form is printed. Pay special attention to corners and edges

• Use your thumb to push it outward to get rid of excess

• Trim the edges by pressing the mastic along the perimeter along the edges inside the form. This will make the figure look neater.

• Make sure everything is ready and turn the mold over to extract the finished shape. She should easily move away from him.

If you want to use a complex mold, from where it is difficult to remove the mastic, then the following simple method will suit you (we will show it using the example of a baby):

• Coat the mold thoroughly with confectionery fat

• Make an oval-shaped mastic without bumps, as they can remain on the finished figure

• Now carefully place the mastic inside the mold and remove all unnecessary

• Smooth the top with your finger so that the surface is even.
• Leave the prepared form in the freezer for 5 minutes
• Now carefully remove the figurine from the mold

When the figurine warms up, condensation will appear on it. This is normal, so just leave it to dry for a while.

You can make a mold yourself, and this is done quite simply. For work you need:

• Finished frame, figurine or something else from which you plan to make a mold
• Any silicone sealant from a hardware store
• Starch, also any
• A jar for mixing, which can then be thrown away
• Gloves
• stick for kneading

When everything is ready, start manufacturing:

• Mix starch and sealant with a stick in a ratio of 1:1.5. For example, 1 tablespoon of sealant and 1.5 tablespoons of starch
• Knead this mixture with gloved hands. If it is well mixed, it will stop sticking to your hands.
• Then we make a cake from this mixture
• Take the object from which the impression will be made and take it well into the silicone mass
• Leave to dry for a day and then remove the figurine
• That's all! You have a ready-made mold that you can use

Silicone mold on Aliexpress: sales, discounts, promotions

Sale Aliexpress

Silicone molds on Aliexpress: the best sellers and stores

On the Aliexpress many stores sell silicone molds, and not everyone works in good conscience. If you get to a dishonest seller, you can be left without goods and without money. Therefore, you need to learn how to choose the right stores.

What exactly to pay attention to we talked about in the article "Aliexpress seller rating"

Irina: I waited for the goods for almost three months, I thought it would not come. I ordered one to try. Well, the mold itself is not bad, quite flexible, does not fall apart. There are no burrs or extra bumps. Thank you!

Video: MOLDS from ALIEXPRESS / Molds for mastic and polymer clay from China

These are molds with which you can make decorations for mastic cakes, prepare chocolate figurines, shape caramel sweets, etc. When you look at the finished mold, it seems that making the same is unimaginably difficult. But after reading the instructions for action, you will see - everything is elementary! We will tell you how to make a silicone mold with your own hands.

Method number 1

Leaf-shaped silicone molds for mastic are considered the easiest to create. To do this, we need an ordinary silicone sealant, an embossed sheet of some kind of tree and quite a bit of patience.

That's all! It turns out cheap and beautiful, try it yourself.

Method number 2

Now we will learn how to make more voluminous silicone molds with our own hands in the form of seashells. This technique can be applied to any form, for example, instead of the same shells, take a heart-shaped keychain or a small figure of the Eiffel Tower, in the form of which mastic products will then be obtained. These are special molds for epoxy resin.

Now, in addition to direct sealant, we need three tbsp. l. potato starch, seashells and small jars slightly larger in diameter than the shells themselves.

Making molds is not difficult, if you need a lot of such molds, then over time you will hone your skills and you will get molds no worse than store ones. They can be used not only in the manufacture of mastic and other sweets, but also soap. In soap making, these molds are indispensable, in this way you can make real masterpieces. Below you can see photos of products that can be created using a regular mold. creative success to you!

I offer you step by step master class how to make silicone molds at home with photos and detailed description. Trust me, making your own silicone mold at home is as easy as shelling pears! And it is suitable for sculpting flowers from polymer clay, flowers from mastic, homemade soap or making plaster figures at home.

I did it! From mastic!

When I went to mastic cake courses, I immediately wanted to try making mastic flowers at home. But I didn’t have any molds, and buying everything that I wanted is quite expensive, especially since I’m going to make cakes for myself. And then I decided to try to make a silicone mold for mastic with my own hands from sealant. Of course, it’s better not to eat such flowers (and it’s a pity to eat them), so it’s better to use food sealant molds for food. I went to the hardware store in search of silicone rubber for molds.

I replaced the silicone paste for making molds with the cheapest sealant, on which “Silicone” was written in large letters. The sealant cost about 100 rubles, it seems the whole can is 120-130, you can make a bunch of molds, and in addition there will be a dozen silicone molds for soap. I immediately bought the so-called bottle pistol for 35 rubles. (Bought in Obi-dybenko). In general, for casting silicone molds with my own hands, I didn’t need anything else, except for the large leaves found on the street (probably chestnut), a drop of the simplest sunflower oil, an old credit card to even out the mass and a substrate - a transparent folder. It is convenient to make molds in all sorts of disposable plastic containers, in which salads and the like are put by weight, then the mold will be beautifully shaped from the bottom and sides.

So, How to make a mold from silicone sealant with your own hands!
Squeezed out the paste, approximately the size of the leaf leveled. An old credit card came in handy.

Smeared the leaf sunflower oil. I think that it needs to be washed after the street, everyone already guessed it 😉
I attached it to the sealant, stroked it well with my finger so that the leaf pattern was printed. Excess sealant is easily collected with the same card.

Squeezed out more silicone on top. Smoothed over the sheet. Another stick came in handy to hold the leaf, which "stretched" after the credit card.

Just a couple of minutes later, I carefully removed the sheet from the bottom of the mold.

And I put it with silicone down to make the bottom part flat for him. You can still gently press the sheet against the silicone to print the pattern more clearly.

A few minutes later she took off the sheet. However, you can't take it off. It won't stick with oil.

Here is our mold own production and ready!

The main thing now is not to touch for a few days! From above, the silicone dries up, but the silicone sealant mold will be ready for use only when it dries completely. It took me 3-4 days.

After drying, the resulting mold must be cut off with scissors along the edge, giving it a prettier shape and you can use it! I also tried silicone on the first thing that came to hand - I turned up a plastic photo frame, smeared the edge, and it turned out to be a silicone mold. At a cost, such silicone molds are cheap! And you can use them for soap, cakes (only for decoration), polymer clay, etc.

How to use silicone molds:
Working with silicone mold is also easy. If the mold for making homemade soap is filled, turn it over after the soap has been completely expelled.
If for a leaf or petal made of mastic or polymer clay - I cut out a leaf, attached it, closed it with the second part of the mold, opened it - you're done! True, my mastic was not flower (especially for sculpting flowers from mastic, keeps its shape), but Creativity and master classes!

And for those who have already thought about how to decorate the New Year's table in an original way and what can be prepared for the New Year, the heading Master classes "About delicious!" with detailed step by step recipes with photos of cupcakes, pastries and more!

Hello! Today I will touch on a delicious and beautiful topic - decorating cakes. For those who did not get stuck with plasticine in childhood and just love sweets, this topic should be interesting. Beware, cakes are under the cut))

I am writing this review not only for dear readers, but also for myself to some extent. So that everything is in one place and I do not have to scour the Internet in search of information.
I'll start, perhaps, with the definition of mastic and, of course, the recipe.

What is mastic, recipe

Confectionery mastic - thick putty, sweet confectionery cream.

(Wikipedia)
An obligatory component of mastic is powdered sugar with starch or powdered milk.
Gelatin, glucose (condensed milk, marshmallows (chewing marshmallows), chocolate, honey) can act as a link. Of all the recipes I tried, I liked marshmallow mastic. It is elastic, does not dry very quickly (as from gelatin, for example), but at the same time keeps its shape well (which I could not achieve with milk mastic) Here is a recipe for marshmallow mastic (video from the Internet)

Personally, I did it according to the recipe. I replaced glucose with honey. I liked this recipe more.
And even easier: 200 gr marshmallows + 2 tbsp. spoons of water + 400 gr of powdered sugar. It also turns out quite well.
To work with mastic, we need tools.
I ordered them from different sellers at different times. Well, I'll tell you about everything in order ...

For 4.29 USD

Material: ABS Plastic
Color: Purple
The size:
Length 27.5cm
Diameter 5.3cm
How to use:
1. Roll out the mastic


4 Get a beautiful pattern)

I liked this rolling pin. The patterns are clear and deep. The only thing, for some reason, I expected that it would be silicone and heavier. And it is made of ordinary plastic. But the result did not get any worse.

For 2.95 USD


material: plastic
weight: 35g
color: transparent
How to use:
1. Roll out the mastic
2. Sprinkle the rolling pin with starch so that it does not stick
3. Walk the rolling pin over the mastic, pressing firmly
4 Get a beautiful pattern)

It’s also a good purchase. First of all, it pleases with its compactness. The patterns are not as deep as the first rolling pin. But it copes with its intended purpose. be careful.

silicone molds

Silicone molds are special molds that have the necessary structure to create shapes and flowers of the required shape for decorating confectionery. Designed to work with mastic, marzipan, caramel, chocolate, sugar mass, gelatin and other products at your discretion.
Silicone molds are made of food grade silicone, no smell, can easily endure high temperatures.
IMPORTANT ADVICE FOR USING MOLDS!!!
1. Mold must be dry. Before filling the mold with mastic, it should be carefully sprinkled with starch.
2. Fill the mold with mastic. If you use a 3D mold, which consists of two parts, then after filling, you need to slightly lubricate the mastic with water (only the joining parts), fold the mold and crimp it.
3. Place in the freezer for 15-20 minutes. Massive molds need to be kept in the freezer longer.
4. Gently, slowly, remove the figure from the frozen mold.
After you have taken out the figurine, it is important to let it dry for a couple of hours, and after that you can already decorate.
For pouring chocolate, the mold does not need to be sprinkled with starch. The form filled with liquid chocolate needs to be shaken very, very hard (like a thermometer) to release air bubbles. Shaking, unfortunately, is not always effective because the chocolate is quite thick. It is better to take a softened hard brush and remove the bubbles from the internal cavities. If the figurine is difficult to remove, you can freeze it to a lower temperature.

Packed like this


, for 3.87 c.u.


Material: food grade silicone
Weight: 60g
Size: 15.7cm* 4.5cm*1cm
Pink colour
Permissible use temperature: from -40 to +210 degrees Celsius
How to use:
2. Put the mold in the freezer for 5-10 minutes
3 Cut off excess mastic
4 Carefully remove the "chain"



Video MK with a slightly different mold (from the Internet)

For 2.24 USD


Material: food grade silicone
Weight: 70g
Size: diameter 8 cm, thickness 1 cm
Pink colour
Permissible temperature during use:
-40 to +210 degrees Celsius
How to use:
1 Press the mastic into the holes
2. Put the mold in the freezer for 10-20 minutes
3 Cut off excess mastic
4 Carefully remove the figurines
Items 3-4 can be swapped

For 2.85 c.u.



Material: food grade silicone
Weight: 80 g
Pink colour
Permissible use temperature: from -40 to +210 degrees Celsius
Dimensions:
Length 8cm
Width 5cm
Height 3cm
How to use:
1 Press the mastic into the hole
2. Put the mold in the freezer for 20-30 minutes
3 Cut off excess mastic
4 Carefully remove the figurine
Items 3-4 can be swapped


Video-MK

In general, I liked all the molds. Soft, elastic, without notches. The only thing, as always, is that the sizes are very small.
For a long time I wanted to try to make a mold myself. Sometimes you need some kind of figurine, but it is not there. So I tried to make home-made molds. I found a few "beautiful things" at home. And this is what came of it.

Do-it-yourself mold)))

I must say right away that the ingredients that are used are not entirely food grade. Rather, these molds are suitable for working with liquid plastic, polymer clay, etc. Therefore, I do not urge anyone to use them for mastic. I will rarely use them, in exceptional cases.
And so, we need:
1. Silicone sealant (I had white)
2. Potato starch
3. Any cream (for lubricating parts, so as not to stick)
4 Items that we will "copy"

We squeeze out the silicone and begin to mix the starch into it until it stops sticking. As a result, a plastic mass should be obtained. Approximately this.
Then we form our mold and press objects into it, having previously lubricated them with cream.


Then we leave them to dry for 24 hours. We remove the items, wash them and get the result. I did it)

It's crooked, but they do their job well.

For 1.82 USD

Material: plastic
Weight: 30g
Color: Came white
Length:13 cm
It is used when cutting small details of complex shape according to a template or by hand.
It has three knives. One is for cutting mastic, the other two are for creating patterns.





To be honest, a little useless purchase, since the knife does not cut very well. It is better to take an ordinary pizza knife to replace it. You can also make such patterns yourself.

For $3.80

As you can see, there are still figures in the picture. In real life, they are not. But I noticed this when I sat down to write a review. In principle, I don’t need them.





Material: ASB plastic, can withstand temperatures up to 70 degrees.
Color: yellow-purple
Complete set: figurines + holder
Size:12*7cm, figure holder 13cm
The size of the letters is approximately 0.5 * 0.5 cm
How to use:
1. We place the letters we need in the holder
2. We print a word or phrase on mastic, dough, etc.
3. We get a beautiful inscription)


The same problem, everything is very small in size. It was also not convenient to cut the letters. To insert them into the holder, the letters must be perfectly smooth. To do this, I had to spend half an hour to cut everything off ... There would also be a Russian alphabet ... And so, I don't even know if I'll use it

For 11.64 USD

What is a notch and a plunger

Punching - a tool that allows you to cut a certain shape from the mastic
Punch example

How to use cutting:
1 We press on the mastic by cutting
2 We get the necessary figure (we get it manually from the cutting)
The plunger is a cutting with an ejector (for the convenience of getting the mastic)
Plunger example


plunger device

How to use the plunger:
1. We press on the mastic with a plunger
2 Click on the top button
3. We get the necessary figure (she herself jumps out of the plunger)

Material: ABS plastic
Contents: 33 pcs
I tested them a little in my own way to show you. I'm still far from the original colors)
The set includes
3 cuttings "Cup of a flower" (30mm, 40mm, 50mm)

3 cuttings "Carnation" (32mm, 42mm, 47mm)

4 cuttings "Rose Petals" (37mm, 43mm, 50mm, 57mm)

3 plungers "Stars" (diameter 6mm, 9mm and 12mm)

3 plungers "Heart" (diameter 6mm, 8mm and 11mm)

3 plungers "Butterfly" (40mm, 48mm, 58mm)

4 plungers "Daisies" (20mm, 25mm, 34mm, 40mm)

4 plungers "Plum blossoms" or "Forget-me-nots" (18mm, 20mm, 22mm, 30mm)

3 plungers "Rose Leaves"" (35 mm, 40 mm, 50 mm)

3 plungers "Chamomile" or "Sunflower" (46mm, 55mm, 68mm)


They can also be used to create texture on mastic instead of rolling pins and mats.
For example like this


In general, I am very pleased with this lot, since we would have such a cost of 50 bucks, or even more.
The tools themselves are of good quality. Although, sometimes they don’t cut through the mastic, and springs periodically pop out of the plungers. I already lost one.

For 3.93 USD


Material: plastic
Weight: 80 g
Yellow color
Quantity: 8 pcs
Tools length:15-17cm
To make it clearer to everyone, I made such a sign about the function of each tool. So to speak, a cheat sheet for beginners (including me).
And this is for clarity.

Video-MK (from the Internet)

And of course, for completeness of the review, it is necessary to show the result of working with the tools.
I am far from being a professional in this business. So far, baking such cakes is very rare, as it is very time-consuming and money-consuming. But for the sake of your beloved children, you can’t do anything.

lower tiers
Vanilla biscuit:
5 eggs
1 tbsp sugar (or less)
sachet of vanilla sugar
1 tbsp flour
Beat the whites separately until fluffy foam, gradually adding sugar. At the end, stir in the yolks. Then add the sifted flour (you can with 1 teaspoon of baking powder) and gently mix everything with a wooden spatula (you can use your hand). Bake in an oven preheated to 180 degrees 40-60 min.
Cream soufflé with bananas:
Sour cream-200 g
condensed milk-100 ml
vanillin
gelatin-20g
Gelatin pour 4 tbsp. water, let it swell. Add condensed milk + vanillin to sour cream. Heat gelatin until dissolved - do not BOIL. Cool slightly and add to sour cream. Stir vigorously.
Assembly: Cut the biscuit into 2 cakes. Put 1 cake in a detachable form, covered with cling film. Put whole bananas on it in a circle. Pour cream. Put another cake on top. Put in the refrigerator. Decorate the cake as desired.
Upper tier according to this video, I only added a few tablespoons of cocoa to the dough.

Cake "Air Snickers"
Recipe
Only I added less sugar and made a double portion of the cream. I also baked all the cakes at the same time so that the whipped proteins did not fall off and not be beaten several times.
If you cover with mastic, then the upper cake does not need to be smeared with the main cream.

Cream for fondant on top of the cake(for leveling the cake and isolating it from the main cream so that the mastic does not “float”)
100 gr butter
100 gr chocolate
Melt in a saucepan, let it harden a little in the refrigerator. Apply on top and on the sides of the cake with a spatula or knife until the surface of the cake is perfectly even.

Conclusion: The tools are good. It's worth taking. Especially for such money.
In the near future I plan to take this matter more seriously, so I ordered another batch of tools. So, I will try to continue writing reviews on this topic.
Good luck to all! I plan to buy +72 Add to favorites Liked the review +167 +290

Often, to create a particular craft, you need original molds. This is the name of small silicone molds in which you can put various kinds of materials for their further solidification and use for various purposes.

Of course, you can buy them in the store, but, unfortunately, it is not always possible to find what you need. In this case, you can try to do do-it-yourself molds. Homemade molds are suitable for making figures from polymer clay, gypsum, mastic, soap and much more. They can also be suitable even for baking in the oven. In this case, when choosing a material, preference is given to the most heat-resistant.

1. Do-it-yourself sealant molds

The easiest way to make molds yourself is from silicone sealant. This material is the cheapest of all possible. He also answers all necessary requirements, which molds must have to create figures. Such a sealant can be bought at any hardware store. Preference should be given to neutral or acidic formulations.

There are also sealants with filler, more often with acrylic, it is better to refuse them, as they can crack during operation. Sealants come in completely different colors, from transparent to black. If you need to make a mold so that it can be baked in the future, you should choose heat-resistant sealants that can withstand temperatures of 200-250 ° C.

To create a mold from a sealant with your own hands, you will need:

Sealant.

Sealant gun.

Starch or powder.

Shape to extrude the shape.

Gloves.

Container for mixing mass.

Plastic spoon.

Soap solution.

All materials must be prepared in advance, as the sealant begins to dry very quickly. It is better to take 2 pairs of gloves, because they can tear, and it is not recommended to knead with bare hands at the first stage. It is better to use a container as a container, which can later be thrown away. You can also do without it, doing all this on a prepared surface (plastic or wooden board).

1. First of all, insert the sealant into the gun and squeeze out a small amount of on a prepared surface or in a container.

2. Next, sprinkle it on top with starch or powder. What kind of starch will be, it does not matter at all. This must be done in order for the sealant to create do-it-yourself mold thickened a little, as it is quite liquid itself. Starch or powder will need approximately the same amount as sealant.

In extreme cases, you can use ordinary flour, but the result will be a little worse.

3. Then, using a plastic spoon, knead the mass. When it thickens a little, you should continue to knead with your hands.

4. Form a ball from the resulting mass and press it with the palm of your hand or a flat surface to the table. It turns out a flattened circle. Its width and depth should be slightly larger than the shape with which the desired shape will be extruded for do-it-yourself mold from sealant.

A teaspoon is diluted in a glass of water detergent. This is necessary in order to make it easier to remove the figurine after the mass has completely hardened.

6. Now you should press the prepared figure into the mass of sealant. This should be done by pressing evenly on the entire surface.

7. After that, you need 12 hours to dry completely sealant mold.

8. Then the figurine must be carefully removed and the work can be considered finished.

The result is a cast that can be used as mold for mastic or polymer clay, as well as mold for soap and much more.

Fig. 1 We make molds from sealant with our own hands

2. DIY silicone molds

For creating do-it-yourself mold you can also use Moment silicone. The technique of work is exactly the same as with the sealant. The difference is that silicone hardens a little faster and cannot be used for polymer clay, as it has lower heat resistance. silicone molds well suited for forming the shape of soap or bath bombs, and how to make them, you can read