home Work and education An easy way to make a chicken feeder. Hopper feeder for chickens - cleanliness and order in the bird house

An easy way to make a chicken feeder. Hopper feeder for chickens - cleanliness and order in the bird house

It is a well-known fact that the eggs of chickens that live in the wild, and not in the cramped walls of poultry farms, are much tastier and healthier. Recently, an increasing number of people have been trying to keep these bird representatives.

The greatest difficulties for owners arise when organizing the process of feeding chickens, since it involves significant labor costs and financial expenses. Because of this, the choice of feeders must be approached with all responsibility.

But you can save a significant amount if you independently set up a collection point for bird feed. A do-it-yourself chicken feeder is an opportunity to create a useful device that will be useful in everyday life. You will receive not only material benefits, but also moral satisfaction when the chickens peck grain from these feeders.

Primary requirements

There are a number of requirements that are presented when creating them:

Strength. The creation of feeders should be based on materials that retain their shape and are resistant to mechanical stress.

Ease of use. The device should be easy to clean. It is necessary that the feeder is easy to pour food into, and that it is convenient for poultry to eat from it.

Sustainability. Under no circumstances should the feed collection point change its location after direct contact with poultry.

Rationality. It is necessary to make the device in such a way that it is impossible for droppings or debris to get into it.

There are other requirements for the feeder that apply to them depending on the characteristics of the content poultry.

Types of devices for feeding chickens

The pressing question: “How to make a chicken feeder?” There are several types of feeders that you can make yourself. Let's present the most interesting of them.

From a plastic bottle

This is perhaps the easiest feeder model to make. To make it you will need two plastic bottles, the volume of which can range from 1.5 to 5 liters. You will also need a flat material of a certain hardness.

First, the bottom part of a 1.5 liter bottle is cut off. This must be done to make it convenient to fill the grain. Holes should be made closer to the neck of the bottle. It is through these holes that the feed will move.

A hole is created in the central part of the cut container, which is the same size as the neck of the bottle. We take a sheet of plywood with a diameter of 50 by 30 and also create holes with a diameter that matches the bottle.

At the last stage it is necessary to omit plastic bottle volume of 1.5 liters into a container whose volume is larger. This must be done in such a way that the neck passes through both holes and comes out directly below relative to the piece of plywood. We fix the cover. Plastic feeder for chickens is made in the best possible way.

In the photo of the chicken feeder you can visually see the features of this design.

Hopper feeder for chickens

Another chicken feeder idea is to create a hopper feeder. To create this type of bird feeding device, you will need a sheet of plywood from which several elements are cut:

in front of the bunker (400 x 500 mm);
back of the bunker (400 x 400 mm);
2 pcs. sides. The side walls are made in the form of a cone that connects the main parts of the feeder;
lid. It should be slightly larger in size than the top of the poultry feeding device.

Simple drawings of chicken feeders demonstrate that an opening is left at the bottom of the installation where food will be delivered to a tray, from which the chickens will subsequently peck grain.

After the chicken coop residents eat a certain portion of the feed from the tray, the volume of grain in the bunker will decrease. Adding poultry food to the device is easy.

You just need to open the top of the device and pour in the required amount of feed. You can use a do-it-yourself bunker feeder for chickens for many years.

Photos of chicken feeders

Are you planning to raise chickens and have already built a chicken coop for them? Then it's time to take care of the rest - in particular, the feeder. It is easy to make, especially since you can use various materials. Let's look at the simplest and most common options for making a chicken feeder with your own hands.

The feeder can be made from anything - for example, from boards, boxes, pipes or plastic bottles. But regardless of the chosen material, one problem always appears - we're talking about about mixing feed. And if you use several feeders at the same time, they will take up too much space. There is a way out of this situation, but we’ll talk about it a little later.

So, in order for the feeder to cope with its functions, you need to prepare for its construction in advance. First, decide on the size of the structure and choose a place for it. It does not matter whether it is located in the chicken coop or in the yard - all birds should have free access to it. Moreover, chickens should not crowd or interfere with each other while feeding.

It should also be remembered that chickens need not only dry, but also wet food (we are talking about mash). In the first case, hopper containers in the form of a cylinder are ideal, in which the volume of feed is replenished automatically. For wet food, a trough-shaped feeder is more suitable, on top of which there is a “spinner” made of timber.

Making a chicken feeder - an overview of popular methods

Of course, the procedure for constructing a trough differs from a bunker-type feeder both in terms of labor costs and the complexity of the work. But modern equipment and the materials significantly simplify the process, so there will not be any particular difficulties.

Note! When constructing a feeder, you need to adhere to one important rule: the structure should be stable and food should not spill out of it. Otherwise, not only will there be an overconsumption of feed, but also a violation of sanitary standards.

Option one. Creative feeder made from a cutting board

To make one like this unusual feeder for birds, you must prepare:

cutting board;
funnel;
a small plastic cup;
rubber hose (transparent);
electric drill.

The further algorithm of actions should look something like this.

Table. Making a feeder from a cutting board

Steps, no.	Photo	Description
Step 1		Take a funnel (preferably plastic) and trace its outer contours on the board. Try to do everything as accurately as possible.
Step 2		Drill many holes within the drawn circle. It is important not to overdo it here, since the supply of dry food should be limited.
Step 3		Take a pre-prepared transparent hose of the required diameter. Connect the hose to the end of the funnel; if necessary, you can use additional fasteners (for example, a clamp).
Step 4		Take a plastic cup and make a hole at the bottom as shown in the image. The diameter of the hole should be such that the end of the hose fits tightly and holds well.
Step 5		Take the other end of the hose and place it in the hole you made. If the density is insufficient, treat the edges of the hole and the outer surface of the hose with sealant.
Step 6		Next, you need to glue the bell of the funnel to the cutting board. To do this, treat the contour of the circle with the holes with sealant.
Step 7		Place a funnel on the circle and hold it in this position until the sealant dries.
Step 8		Connect one end of the hose to the cup and the other to the glued funnel. The funnel should end up at the bottom of the board.

When assembled, the feeder described above will look like this. You can add grain.

Note! The grain will be poured through the hose from the watering can into the cup itself. Also make sure the board is stable as chickens are likely to perch on it.

Option two. Hopper feeder made from a plastic bucket

This design can be considered automatic, since your participation in feeding the chickens will be minimal. Such a feeder can be purchased ready-made in a store, but it will not be cheap, so you can try to make it yourself. The manufacturing procedure is quite simple.

Supplies you will need:

special sectional bowl for animals;
plastic bucket.

After preparation, follow the instructions below.

Step 1. Take a plastic bucket and make holes in the bottom through which the food will pour out (as shown in the image below).

Step 2. Attach the sectional bowl to the bottom of the bucket using screws.

Step 3. Fill a plastic bucket with grain or any other food and close the lid.

The advantage of this design is that it can be installed in almost any convenient place (stand or hang). As food is consumed, it will be automatically poured into the bowl under the influence of its weight.

Option three. Construction made from plastic bottles

Nowadays, water is often stored in cheap plastic containers. There are probably such bottles in every home and they can be used to build a convenient feeder.

Step 1. Cut the bottle in half and make holes in the bottom half as shown in the image. The size of each hole should be sufficient for the chicken head to fit freely into it (it is advisable to leave a small margin).

Step 2. Take the second bottle, cut out the bottom, then place the neck down inside the prepared cut. As a result, there should be a few centimeters between the neck and the bottom.

Step 3. Pour the grain inside and cover the hole in the top with something. The disadvantage of this design is that in case of bad weather it must be moved indoors, but for placement inside the poultry house this is the best option.

For chickens, you can make a similar design in smaller sizes using regular plastic bottles. The manufacturing technology will be the same.

Option four. Simple wooden feeder (No. 1)

If you don’t have a lot of chickens, and only pieces of wood from scrap materials, then you can make the feeder described below. The latter is great for cases where owners do not have the opportunity to periodically add grain (in other words, this is also a bunker feeder). It is not difficult to make such a design, the main thing is to strictly follow the instructions below.

First prepare these Consumables and equipment:

pieces of durable thick plywood or wood;
electric drill, set of drills;
a pair of loops;
sandpaper;
saw;
screwdriver;
pencil;
roulette.

After this, proceed directly to production.

Step 1. Start by creating a drawing, then transfer it to the tree, drawing out the elements of the required sizes:

bottom 29x17 centimeters;
two “sides” 40 centimeters high with an upper edge of 24 and a lower edge of 29 centimeters;
two rectangles for the front wall - 28x29 and 70x29 centimeters;
top cover (26x29 centimeters);
back wall (40x29 centimeters).

Step 2. Carefully cut out all the elements.

Step 3. Make holes for the screws in the required places using an electric drill.

Step 4. Sand all surfaces to ensure they are smooth and safe for birds.

Step 5. Using screws, assemble all the elements into a single structure. To achieve maximum density, you can use a clamp. It is also important that the back and front walls are attached at an angle of 15°.

Step 6. Use the hinges to attach the cover to the back of the side walls.

Step 7. It is also advisable to treat the feeder with an antiseptic. No paints or varnish should be used.

Note! The finished structure will be spacious and comfortable; food, protected from moisture, will be gradually fed into the automatic mode. Apart from labor costs, no other shortcomings were noticed.

Option five. Simple wooden feeder (No. 2)

Another simple option is a feeder made in the form of a small trough. It is suitable for those who have a large number of chickens and have a shelter in case of precipitation.

To work you will need:

Step 1. First, make a drawing of the future structure. Determine as accurately as possible all elements, their dimensions and installation locations of fasteners. This is the most critical stage that will help you avoid possible errors and inconsistencies.

bottom (15x100 centimeters);
a pair of side walls (8x100 centimeters);
one beam (HxWxD - 2x3x100 centimeters);
small end walls 15 centimeters wide and a height corresponding to the long side walls + the thickness of the bottom.

Sawing out the end walls is the most difficult step. For better performance We advise you to look at the image below.

Step 3. In accordance with the drawing, cut out each of the elements.

Note! The bottom should be thick and heavy enough to prevent birds from overturning the structure. The height of the walls should be comfortable for the chickens.

Step 4. Connect all the elements together. Try not to leave any gaps, as food can spill out through them. Additional wood processing is not required; moreover, if desired, this design can be modified to suit your own needs.

The advantages of such a feeder include durability and strength, as well as versatility regarding the type of food used (the latter can be either dry or wet). As for the disadvantages, there is only one - the feeder needs minimal care.

Option six. Two-story wooden feeder

The next option is intended primarily for dry food (although various mash can be used). Ideal for small rooms, as the second tier compensates for the lack of free space. For work you will need screws and bars.

Step 1. First, prepare all the elements of the feeder. The main one will be the lower tier, the height of which should be 25 and the width 26 centimeters. As for the length, it depends on the number of birds.

Step 2. Make special grooves into which the damper will be inserted.

Step 3. The second floor will be a small trough with a board height of 10 centimeters. Place the second floor on the ends of the first, then attach with hinges.

Option seven. PVC pipe construction

An easy to implement option that requires minimum expenses and effort. PVC pipes are sold everywhere and are inexpensive. To make, use one of the methods below.

Method one. With cutouts

To build this structure, take care of the following consumables:

a pair of PVC pipes (40 and 60 centimeters in length);
two plugs;
connecting elbow.

The 60 cm pipe will be installed horizontally and will serve to feed the pizzas. Another pipe is installed vertically and is necessary for feeding grain. Start by making a hole in a longer pipe, although instead they often make one large one, through which the birds will peck the grain.

Step 1. On a 60-centimeter pipe, draw holes with a diameter of 7 centimeters and with the same spacing.

Step 2. Cut out the drawn holes.

Step 3. Place a plug on one end of the pipe.

Step 4. Install an elbow on the other end, and, in turn, insert another pipe into it.

Step 5. Secure the resulting structure in the poultry house, preferably in two or three places at once, so that it holds well.

After each addition of grain, put a second cap on top to prevent debris from getting inside. The described design is also a bunker design, so feed can be added only once or twice a day.

Method two. With tee

In this case, for production you will need:

PVC pipes selected by size (70, 20 and 10 centimeters);
two plugs;
tee with an angle of 45°.

Step 1. Take a 20cm pipe and put a plug on one end. This will be the bottom of the feeder.

Step 2. Place a tee on the other end of this pipe so that the side elbow is directed upward.

Step 3. Insert a small pipe into the side hole.

Step 4. Insert the longest length of pipe into the third hole of the tee. Here, as in the previous method, after each filling of feed the pipe must be closed with a plug.

There are other ways to make a bird feeder from PVC pipes, as experienced poultry farmers talk about in the video below.

Video - Feeder made of pipe

Option eight. Canister construction

A cheap and easy way to make a feeder.

For work, prepare:

any plastic canister;
a piece of pipe 10-15 centimeters in length;
fasteners;

Step 1. Clean and dry the canister thoroughly.

Step 2. Using a knife or any other tool, cut about 5 holes on the sides. The diameter of the holes should be about 6-7 centimeters so that the head of the chickens can fit freely into them.

Step 3. Make a hole in the top for filling grain and attach a pipe on top (the diameters must match). This will prevent birds from getting inside.

To protect against rain and debris, you can additionally take care of the pipe cover.

Option nine. CD container design

Don't throw away your old CD container - you can still use it to feed your chickens!

In order to build such a structure, prepare:

long container;
large bowl;

Step 1. Clean and dry the container, then cut three or four 2x2 centimeter holes on its walls near the rim.

Step 2. Fill the container with food and cover the top with a bowl.

Step 3. Turn the container with the bowl over and place it in the desired location.

Note! Make sure that there are no sharp corners in the cut areas that could injure the chickens.

We also note that this design is not durable and is designed for a small amount of birds.

Option ten. Automatic design

The video below shows another interesting option - a structure that opens under the weight of the chicken.

Video - Automatic feeder

This is not a complete list possible options– the article describes only the most popular of them. By showing ingenuity and imagination, you can come up with your own design, the main thing is that the product is durable and safe for feathered pets.

When keeping chickens in a household or country house, it is important to ensure that the poultry house has the necessary equipment. Chicken feeder – important element in the chicken coop, and it is not necessary to buy it, since you can make it yourself from common materials. Let's look at several popular options for this device, as well as the features of making a feeder at home.

Chicken feeders suitable for use in the household are quite varied. They differ structurally, in the material from which they can be made and in the place where it is most convenient to place them in the chicken coop.

Depending on the material used

To make chicken feeders, wood, metal or even plastic is used (for example, these can be pieces of plastic pipes). It all depends on the type of food for which they are designed.

The most common ones in many poultry houses are wooden devices. Dry food is poured into them: feed, grain, premixes. Such feeders are not suitable for wet mash: the mixture will stick to the surface of the walls, quickly turn sour and spoil new portions of food.

Plastic containers are well suited for wet food; they are easy to clean and wash, they dry quickly, are lightweight and durable.

Metal is used for feeders in which grass will be placed. Typically these are v-shaped devices with a solid back wall, while the front is closed with rods or metal mesh.

Depending on the type of feed supplied

How often the poultry farmer will need to visit the house will depend on the method in which the grain mixture will be supplied to the feeder. Simple models– ordinary containers with sides, often elongated, are used mainly for young animals. Trough-type feeders are placed on adult chickens, but not in cages, but outside them. Birds get food from them by sticking their heads through the bars. Or they are installed on the floor of the chicken coop when chickens are kept on the floor.

However, bunker feeders are considered the most convenient. Dry grain or mixed feed is poured into them. Below, under the hopper of automatic chicken feeders, there is a tray into which the grain spills as the bird eats it.

Depending on the location in the cage or poultry house

Homemade chicken feeders can be floor-mounted or wall-mounted. The devices of the first option are mobile; they can be moved from one place to another at any time. Mounted feeders are mounted on the wall of the poultry house or the cage grid. Their advantage is stability; chickens cannot knock over such a feeder and spill food out of it onto the floor.

Requirements for chicken feeders

It is known that birds can scatter food from feeders when they eat. How successful they will be depends on the design of the devices. The best option There will be industrial feeders made specifically for this type of poultry. They meet all ergonomic requirements, are easy to use and comfortable for the chickens themselves. But for structures that are made independently, these requirements also apply:

Feeders should be equipped with some kind of protective device, such as a net, spinner, bars or sides, which will prevent the bird from throwing food around.
They should be ergonomic, comfortable, easy to clean and wash, and weigh little.
Their volume should be sufficient to accommodate food for the entire chicken population at once, and the size should be such that all chickens can freely reach food without crowding.

For each chicken, you need to leave 10 cm of feeder space, for a young chicken - 5 cm, in circular trays, chickens only need 2.5 cm of space.

Making a groove-type feeder from wood with your own hands

One of the most basic options is a wooden trough-shaped feeder. It can be installed not only in a poultry house, but also in an outdoor aviary for walking, which contains a large number of birds.

To make it you will need to take:

20 mm thick boards or moisture-resistant plywood;
hammer or screwdriver;
nails or screws;
hacksaw;
ruler and paper with a pencil.

First of all, you need to sketch out a diagram of the future feeder or use the presented drawing.

Manufacturing process:

Cut out all the elements of the feeder from wood or moisture-resistant plywood:
- bottom – length 660 mm, width – 180 mm;
- dimensions of two side walls – 700 mm by 50 mm, thickness 20 mm;
- two end walls - 180 mm wide, 200 mm high and cut off the corners according to the drawing;
- the top bar is 700 mm long, 40 mm wide.
Clean the cut areas with sandpaper.
In the end walls, mark the places for future bottom fastenings at a height of 41 cm, and fix these elements so that there are no gaps left through which food could spill out.
Secure the side walls at the same height as the bottom.
Install and secure the top bar.

Among the advantages of such a design are strength, stability, ease of use, and the ability to be used for dry food.

Self-production of a bunker-type feeder

Making your own bunker feeder for broilers and laying hens is also easy. It can be made of wooden boards or thick plywood. You can also use bulk plastic bottles, household buckets or building materials(they must first be cleaned of residues and washed well) or PVC pipes.

Option 1: from a plastic bucket

To make a bunker feeder for chickens with your own hands, you will need a bucket with a handle, a plastic tray (for example, from under a flower pot), the diameter of which will be 8-10 cm larger than the diameter of the bottom of the bucket. Or the bottom of a slightly larger bucket or some container with sides may work.

On the side of the bucket, near the bottom, make 6-8 holes at equal distances from each other, 2.5-3 cm wide, in the form of an arch along the entire circumference, with a height not exceeding a plastic tray. Connect the two parts of the structure together with a bolt and nut. Cover the top of the feeder with a lid. It can be placed in the chicken coop directly on the floor in a convenient place or fixed at a height of approximately 0.2 m from the floor.

Using the same principle, a bunker feeder can be made from a canister of a suitable volume.

Option 2: from PVC pipes

Recently, many poultry farmers have begun to use PVC sewer pipes with a diameter of 15-16 cm to make feeders for domestic chickens. They can be used to make a structure of both vertical and horizontal type. In both cases it will be a bunker.

Let's take a closer look at how to make a horizontal type feeder. The length of the bunker (where the feed will be poured) can be arbitrary, but we recommend making this part 700 mm in size. The part from which the chickens will eat is made 300 mm long. Holes with a diameter of 4 cm are cut out in it at the same distance from each other and one of the sides is closed with a plug so that the incoming food does not spill out. These 2 parts are connected to each other with a plastic elbow. The resulting L-shaped structure is secured to the wall of the poultry house with clamps, while the horizontal part should be 20 cm from the floor, the feed is filled in and the lid is closed.

Vertical feeder made of plastic pipe they do it a little differently. The plastic pipe is divided into 3 parts:

the bunker that acts as a bunker is made 700 mm long;
lower part - 200 mm;
the average one, where the bird will eat from, is 100 mm.

You will also need two plugs and a 45º plastic tee.

All the listed parts are connected according to the presented image: a tee is attached to the long part of the pipe, a piece 10 cm long is attached to its central branch, this will be the feeder. A 20 cm pipe is attached to the bottom and closed with a plug. After installing the structure in the poultry house, a piece of pipe 10 cm long will be located just at the height of the chickens. At night it can be closed with a plug.

How many of these feeders will need to be made depends on the number of birds - 1-2 chickens can feed from one such structure.

Devices made from sewer pipes are convenient because they hold a lot of food; you don’t often need to add it, so the chickens will never go hungry.

Option 3: made of wood

To make a wooden automatic feeder you will need sheets of thick-walled plywood, hinges, screws, a tape measure, a pencil, a ruler, a drill, and a jigsaw. The first stage of work is familiarization with the drawing, from which all the constituent parts of the structure are then cut out.

The bunker consists of 5 parts: a front wall, its dimensions are 27 cm high and 29 cm wide, a rear wall (39 by 29 cm), 2 identical side walls (according to the presented drawing), a bottom 29 cm by 17 cm, an apron 29 cm by 7 cm and a rectangular lid measuring 35 by 26 cm.

Algorithm for making a feeder:

All necessary elements for assembly are cut out of plywood according to the presented drawings using a jigsaw.
In the finished parts, using a drill and drills of different diameters, make countersunk holes for screws in places of future fastenings. All edges are sanded clean.
The apron is screwed to the bottom with screws, and then the right and left sides are clamped in a vice.
On the back and front panels, an angle of 15 degrees is cut out at the top and bottom of them. Install the parts flush with the top edge of the feeder and use screws to fix them to the sides and bottom.
Hinges are used to attach the lid.

The feed will be poured into the tray as the bird absorbs it. When the structure is completed, it is hung on the wall of the chicken coop at a comfortable height for the chickens.

Homemade greenery feeder

In addition to grain mixtures, chickens should receive fresh vitamin-rich greens. You can also set up a feeder to distribute grass and tops. To do this, you will need a plastic mesh with large cells through which the chicken could reach a leaf or blade of grass with its beak. The plastic should be thick enough so that the chickens cannot deform the mesh, and the feeder made from it should be stable enough and not wobble or tip over.

The process of making such a feeder for broilers and ordinary chickens is very simple: you just need to take a piece of mesh about 1 m high and wide, roll it into a ring and fasten it with wire or clamps for strength. The mesh device is installed in the poultry house or on a walking area, and grass is placed inside it to a level at which the chickens can reach it. As green food is eaten, it is reported from above. Thanks to this device, the bird does not scatter the greenery, spoil or trample it.

Ask a question to an expert

Making your own chicken feeders is quite easy. The materials used are cheap, accessible, and practical. Feeders save time, effort and labor for the poultry farmer, who no longer needs to enter the poultry house several times a day to bring food to his birds. The hopper of the chicken feeder contains enough grain or feed; the supply is enough for the bird to last the whole day.

The health of poultry largely depends on timely balanced nutrition. Caring for animals on a farm takes a lot of effort and time, so it is not always possible to adhere to a clear feed distribution schedule. Many breeders are increasingly paying attention to feeders that dispense feed and water automatically. This article will discuss options for making chicken feeders yourself. It is quite possible that some option will interest the reader.

What types of feeders are there?

Feeders are divided into several types based on various parameters. For convenience, a classification method has been chosen according to the materials that were used to assemble the feeder.

Wooden models. Very good for dry food. Birds can be given grain mixture, granules, mixed feed, ground grain.
Metal constructions. Most suitable for wet food and various mashes. However, they can also be given dry grain or mineral supplements: shell rock, gravel, chalk.
Plastic feeders. Designed for the same type of feed as metal ones.
Mesh structures. Suitable for distributing hay in winter or green mass in summer. The main advantage of the models described above is that they can be made independently.

It is also worth noting that plastic and metal feeders must be washed and cleaned regularly. This will prevent food from spoiling if it gets into corners of the container that are difficult for the bird to reach.

Features of feed distribution:

Tray feeder. It is a flat container with sides, they are needed to prevent food from scattering. This feeder will be ideal for any young chicken. Most models have a top, which reduces feed loss to an almost minimum.
Bunker feeder. The second name for this design is an automatic feeder. The big advantage of using it is that it contains the daily allowance for birds, which will last until the next day. This means that the time for distributing feed is noticeably reduced. Due to the fact that feed enters the container as needed, the feeder is called automatic.

Where to place the feeders?

There are two methods for placement:

Floor. Feeders are placed in any part of the poultry room or on walking areas.
Mounted. Most often, feeding containers are hung on the fences of a cage, room or walking area, securely attaching them to the wall.

Separately, I would like to note that in the walking yard, it is recommended to make a covered feeding area and place the feeders there. Having a canopy will prevent unfavorable weather conditions from spoiling the birdseed. If wet grass The chickens will still be able to eat it, but they won’t like the soaked feed.

We make our own feeders

We use plastic pipes to make a chicken feeder with our own hands (photo original ideas can be seen below).

Method No. 1

Enterprising poultry farmers have even adapted plastic pipes to feed their pets. Assembling such a structure is quite simple; the big advantage is that you don’t have to do any drilling, welding or gluing. What you will need:

plastic sewer pipe - you need to choose a wide option and a length of 1 meter;
plastic tee, suitable specifically for the type of pipe that is selected. (45 degrees);
a pair of appropriately sized pipe mufflers;
related tools for cutting plastic, as well as a saw for metal.

First of all, the plastic pipe must be cut into 3 parts. One part is 70 cm, the other is 20 cm and the third, respectively, is 10 cm. Installation is carried out as follows:

You need to put a plug on a 20 cm long pipe. This part is the basis of the feeder.
A tee is attached on top so that the side elbow remains at the top.
The longest piece of sawn pipe is inserted into the tee and closed with a second plug at the free end.
The last piece of pipe will be connected to the tee on the side; it must be inserted all the way.
The last step is to secure the feeder. The structure can be attached to the wall of the room. It is most conveniently mounted on iron meshes or slats.

All that remains is to pour in the food. Feed is poured into the upper part of the feeder, it is enough for 24 hours for a small broiler flock of up to 20 heads or 30 chickens. Food comes from a hole in the tee, which is located on the side. At night, it is recommended to use a cap to close the top of the feeder, this helps protect the feed from debris or foreign objects. If you add grain in a timely manner in the evening, the bird will stop demanding food with loud cries in the morning. In addition, this version of the feeder is very economical and does not allow the feed to be scattered around the room.

Method number 2

To make it you need:

pipe sections, one half a meter, the other 30 cm;
plastic elbow corresponding to the size of the pipe;
a pair of plugs;
related tools: jigsaw, electric saw, drill.

The work will not be difficult.

In order for the chickens to gain access to the feed, it is necessary to make several circle-shaped holes in one of the tubes on each side. The breeder himself determines where it is most convenient to cut the circles.
A hole is made using a drill, and then it is sawed through with a jigsaw. The most convenient diameter is approximately 8 cm. One side of the pipe is closed with a plug.
The tubes are connected using an elbow, and the feed container is ready. The feeder should be secured to the wall with wire. For better fixation, fastenings are used at the top and bottom.

The upper tube is filled with grain and closed with a second plug on top. It works on the same principle as the previous option.

You can also make a horizontal hole.

Method number 3

This option will also require plastic pipes, and the manufacturing time will be no more than half an hour. What you will need:

the frame of the structure is 20 by 20 cm;
plastic canister of 10 liters or slightly smaller volume;
plastic pipe for sewerage (piece height no more than 15 cm) and water pipe no more than 30 cm;
industrial adhesive tape;
self-tapping screws, nuts, mounting angles;
awl, saw, nails, hammer, rope.

After preparing everything you need, it is recommended to start working.

Most Popular this type feeders are used by broilers. The bird consumes a large amount of feed and leads a sedentary lifestyle. The breeder only needs to fill the canister with compound feed once a day and not feed the birds during the day. Poultry farmers independently set a feeding schedule based on the needs of their pets. A 6-liter canister, when fully loaded, provides 30 broilers with food for a day. If the livestock is smaller, then a canister with a smaller volume is used.

DIY chicken feeders: photo original ideas

Above are just a few examples of creating do-it-yourself chicken feeders. In fact, there are many more of them.

So, DIY chicken feeders. Photos of original ideas can be seen below.

This feeder is made similarly to the plastic pipe product, but it is much easier to make.

Another option for economical feed consumption. This design will allow the grain not to crumble.

And this version of the feeder not only saves space in the chicken coop. Such a feeder will never turn over, and therefore the grain will not crumble.

Here's another way to save food from spilling. You couldn't imagine a simpler idea.

Video. DIY chicken feeders

Do you already have one or are you just planning to equip it? You just need to think about feeder, which will save both money and strength.

In addition, the bird will eat regularly. Having poured the food once, you will not need to worry about replenishing it.

Yes, and in the chicken coop it will be much cleaner, the bird will not trample the food into the ground, that is, all the food will go directly to its destination.

When choosing it you need to take into account quantity And age birds you have and the types of food you give them. You can easily make feeders yourself or buy them.

In this article We will tell you in detail about the types of such feeders, their manufacture and selection criteria when purchasing.

Types of feeders

Feeders for laying hens are divided into kinds according to the constituent materials, position in the chicken coop and the type of feed used (liquid or dry).

By components materials they are divided into those made from:

Trees;
Plastic;
Galvanized iron.

By location Feeders in the cage can be:

Hanging;
Floor-standing.

Type supplied feed, the following feeders are produced or manufactured:

Tray. These are containers in the form of a trough, the walls of which do not allow mash or other liquid feed to be thrown to the chickens. A tray feeder is best for chickens;
Grooved. These are feeders with an easily removable restrictive grid or turntable. They have separators that allow you to fill it with both dry and liquid (mash, porridge, etc.) food;
Bunker. It is a cylindrical vessel with a tray at the bottom. The grain is poured into the feeding tray as the chickens empty it.

Advice! For dry food, a bunker-type feeder (for example: a simple plastic bottle) is better suited, the main advantage of which is the complete automation of feeding.

Necessary Requirements

There are only three Requirements for chicken feeders:

All food must be used. That is, the feeder needs to be made such that the bird I could not I would like to jump and scatter food around the chicken coop. For this purpose they are made turntables, sides and other devices. Also required sustainability products;
The feeder should be easy to maintain, i.e. the process of filling it with food should not cause technical difficulties. The feeder should also be easy to clean and move without difficulty;
Size and the capacity of the feeder should depend on the number of chickens. Preferably so that the size of each compartment is approx. 10 cm for adult birds and chicks - 5 cm. In a circular feeder, such compartments can be about 3 cm. As a result, both strong and weak birds will be fed, and the quality of meat and eggs will improve.

Making a feeder with your own hands

So, if you are going to make a chicken feeder yourself, then below are three options its manufacture.

Option one: bottle feeder

It's popular and simplest bunker feeder option. To make it you need:

Find a “thick” plastic bottle with a handle on the side and some kind of container for the tray. Good fit menazhnitsa, sold for seedlings;
Having retreated 8 centimeters from the bottom, you need to cut holes - through them the bird will peck the grain;
Attach the menagerie, cut the handle and hang the bottle on the cage.

Option two: plywood feeder

Many people have on their farms sheets plywood. You can make a lot out of them comfortable bunker feeder for laying hens. For this:

From a suitable sheet you need to cut out three walls of the future feeder with a height of 1m and fasten them;
So that there are no obstacles to the feed plywood at the bottom it is nailed under a small angle(for granulated feed - in 25 degrees, for grain – in 15 degrees);
Next we make the front restrictive side (not less 6 centimeters) and side sides (at least 12 cm);
Using self-tapping screws, screw the front wall and install the feeder in the chicken coop.

Advice! After manufacturing, it is recommended to paint the feeder to facilitate further care of it.

Option three: pipe feeder

To make this version of a chicken feeder you will need to buy sewer PVC pipe( 1 meter length), stubs suitable for her tee.

Manufacturing process:

The pipe must be cut into three parts ( 70 cm, 10 cm And 20 cm).
For a part at 20 cm A plug is put on top and a tee on the bottom.
The 70-centimeter part of the pipe is “set” on top of the tee, the other is the same - closed with a plug.
Inserted into the tee on the side 10 cm piece of pipe.
The finished structure is attached to the chicken coop cage. The feeder is ready.

Advice! At night, it is advisable to close the opening of the feeder with a plug, this will keep the food clean.

Where to buy a chicken feeder?

In assortment specialized stores have many feeders made in Russia, Italy and China at reasonable prices.

You can also purchase simplest device from plastic in about 110 rubles, and a more durable feeder made of galvanized iron in about 5,900 rubles(Novital).

At the time of buying ready feeders are important consider:

Materials from which the feeder is made. They shouldn't highlight toxic compounds harmful to the health of both humans and birds should not be oxidized;
Strength. The product must withstand fairly strong blows from the beak and not be damaged;
Accessibility for treatment with disinfectants and washing. The feeder should be easy figure it out.

Following video demonstrates a clear example of making a chicken feeder from PVC pipe: