My business is Franchises. Ratings. Success stories. Ideas. Work and education
Site search

The project of a one-story house z10 has been implemented. Z10

There are no immediate photos after filling. The story was funny but not very funny. The customer decided not to pay me 10% of the cost of the material for intermediary services and will do it himself. Since he had already ordered concrete from Ivanteevka, he decided to take it there this time too, and was clearly instructed on what brand and plasticity of concrete was needed, as well as the delivery mode. Which is exactly what I conveyed to them. I don’t know what and how they promised him, but the concrete arrived completely different in terms of plasticity and aggregate size. After laying the first 2-3 cubes out of 25, it became clear that we couldn’t disperse the concrete, after all, the height of the concrete layer above the corrugated sheet was 8 cm and above the pipes 5 cm. After that, the concrete workers were sent, the concrete truck that arrived first freaked out and left, taking with it 5 cubes of concrete, then they started the following vehicles approached, which was a surprise since it was ordered according to the principle, we begin to unload the first one, if everything is fine, we give the go-ahead and load the rest with a gap of 30-40 minutes. They decided not to wait to bring everything at once. I refused to accept concrete. The customer arrived and the fun began. The manager and laboratory arrived. The assertion began that concrete is good, I’m bad, I don’t know how to lay concrete, and in general I’m a fool, I was especially pleased by the passage that their plant is not certified to give 5th plasticity. A big plus for me it was that the customer stood nearby and saw very well what they brought to us. The gentlemen from the plant realized that no one wanted to accept their concrete and quickly brought a 25-liter bottle of plasticizer. Two buckets of 5 cubic meters and the concrete became more or less normal. We filled 2/3 of the slab and the mixers ran out. The second part of the show began, the Armenian arrived first and did not unload 5 cubes. And he began to claim that he unloaded all 9 cubes here. Again, I was glad that the customer was present and saw how much was unloaded, there were even photos. Separate performance and threats. As a result, the remaining 10 cubes were ordered from another office, they arrived quickly and had the required plasticity.

The bottom line is that the pouring took 10 hours instead of 2-4 hours, the last concrete was poured at 10 pm in the dark, it was not possible to make a completely smooth surface, there is a level, but there are potholes at the mounds, although very few and 80% of the mounds were knocked down with a hammer drill later .
Once again they promised to bury me.
I had to take on the performance and the threats myself.
But overall the filling was successful.

A small digression from the topic.
Since Itonng trowels are a rare piece of crap, I’m posting a photo of a homemade carriage, the price is 120 rubles,
The angle of inclination of the spatula is 60 degrees, the board is regular 25x150.
The handle of the spatula is cut off with a grinder. The width of the basket is equal to the width of the block.

P.S. I can upload it more compactly, but I can’t do it through attachment management, my ZhPRS refuses. small files pass, but now 70-100 kg are being stupidly stupid. Radical works fine. I'll try in the future.

TO BE CONTINUED.

Project Z10 was created for people who value conciseness and simplicity in the design of their living space. Thanks to the convenient layout, rational use area and the absence of a second floor, the construction of the building is cheaper than other similar ones. Those who wish to have additional rooms can arrange them using the usable area of ​​the attic. There may be an office or a nursery. The space of the house is divided into sleeping and living areas, there is a covered terrace equipped with a fireplace. It can also be used as additional living space. The kitchen and dining room space can be combined. This technique will help to visually enlarge the space and add zest to the interior. Any housewife will be pleased with the presence of rooms that are simply necessary in the household - two large storage rooms. In addition, the layout includes two bathrooms, one of which is combined with a bathtub. Ready project small one-story house Z10- an excellent solution for a small family

Location on the site


Description of the Z10 project

Z10will be appreciated by all fans one-story houses. The layout of the house includes a living room with access to the terrace, due to which the area of ​​the day area can be increased. The kitchen can be fenced off or combined with a dining area, which will add special interest to the interior. In the recreation area there are three bedrooms and a shared bathroom. This project is suitable for a family of 4 people who value comfort and elegance in the exterior of the house.

Facades Z10

This information applies to our CONSTRUCTION services!

"BASIS" (house box)

Our work on building your home begins precisely from this stage, which is the minimum scope of work that we can offer. Anticipating questions about why we don’t build separate foundations, don’t build on someone else’s foundations, or don’t carry out a smaller amount of work, I would like to say the following: installing separate house structures is either too expensive for the customer or does not ensure continuity warranty obligations, which contradicts our principles of quality and responsibility in work. This stage includes the installation of a foundation, the bases of porches and terraces, enclosing and load-bearing walls of the house, partitions, installation of floors and roofing. After completing work at this stage, we carry out conservation measures, such as temporarily filling window and door openings and covering critical structures. The result of the work at this stage is a building that is not yet ready for habitation, but is sufficient to ensure safety for several years, without the threat of destruction of structures and materials. In a word, the “Foundation” is what it makes sense to start building your home from.

“Basic” (finished house from the outside)

This stage of construction includes the following: insulation of wall structures, floors (or attic roofs) and foundations, facade finishing, installation of windows and entrance doors, gates, installation of decorative structures. The house at this stage looks the same as in the project image, unless of course you want to make changes to the exterior design.

"For finishing"

The most popular stage. It must be said that construction at this stage without dividing the process into seasons makes sense for houses with an area of ​​up to 150 square meters or for houses over 300 square meters, as is the case with houses in the range from 150 to 300 meters, additional expenses V winter period don’t make sense; it doesn’t make sense to build in front of a house over 300 square meters with stops, because it won’t cause savings. This stage includes: installation of utility networks inside the house, including boiler equipment, power supply input devices, plastering of walls, installation of subfloors, plastering of slopes. The house is ready for finishing. You can register the building, connect all external utility networks (we also offer our services in this section).

"Full construction"

The final stage of construction is the most creative and requires the creation of an interior design, which will allow you to see your costs before starting work, and high-quality visualizations to present the result of the work. The Ultra Es company offers its services for interior design of the High Quality, please check out our design proposal in the appropriate section of the site.

We provide a 12 year guarantee on all work!

Welcome to Ultra Es!

By ordering construction services from our Company, you receive adaptation and linking of the project to the site for free.

If you only need a project, you can order it in our office by leaving a request on the website, or by placing an order by e-mail and receive the project in a place convenient for you.

By purchasing a house project from Ultra ES, our customers receive a full package of documents necessary to obtain a building permit and carry out work on the construction of a house.

The project consists of two main sections: architectural and construction (can be supplied separately) and engineering (added in the full version).

The architectural and construction part of the project includes:

  • An architectural section consisting of architectural and construction drawings, which indicate the exact geometric parameters of the building, its structures and their elements (floor plans, floors, roof plan, facades, sections, woodwork specifications, visualization).
  • Structural section containing general data, design solutions for foundations, floors, roofs, drawings of individual units and parts, specifications of products and materials (foundations, floors, lintels, roofing, structural units and parts).

The engineering part of the project consists of detailed diagrams:

  • Water supply and sewerage systems (water supply wiring diagram, sewerage wiring diagram).
  • Heating and ventilation (heating wiring diagram, ventilation wiring diagram, boiler wiring).
  • Electrical supply (lighting wiring, wiring power networks, ASU diagram, grounding system).

Sections also contain general data, general and technical description, as well as specifications of materials, equipment and other structural elements of the building.

The design solution of the project is as follows:

  • Walls - aerated concrete/ceramic blocks
  • Overlapping - monolithic overlapping
  • Roofing - ceramic tiles / metal tiles / cement-sand tiles

Additional information on the project:

  • All projects are made to order, after 100% prepayment.
  • The project production time ranges from 5 to 35 working days.
  • This project is typical and does not take into account specific construction conditions.
  • Construction of a house requires adaptation of the project taking into account specific geological and topographic conditions, which can be done for an additional fee.
  • The client receives the project in two copies on A3 paper, either in a mirror version or in a standard version.

Facades Z10