Receipt tape dimensions. Receipt tape and thermal tape, offset paper

Today, receipt tape is used everywhere. Shops, banks, restaurants, hotels, POS terminals are required to issue the consumer a sales receipt, which will subsequently become documentary evidence of the purchase of a product or service. Therefore, it is absolutely not surprising that the receipt tape in mandatory is present in the lists of consumables of these institutions. One of the most common options for receipt tapes is offset tape, which is what our material is dedicated to.

What types of cash register offset tape are there?

There are two types of offset receipt tape: single-layer and multi-layer.

1. Single-layer cash register tape is offset paper rolled into a roll of a certain width. Typically, for this type of receipt tape, printers based on the impact method are used. Depending on the manufacturer, the last few meters (from 2 to 5) are equipped with a special marker in the form of a red stripe. Its appearance signals that the roll is about to end.
2. Multilayer receipt tape is made from two layers of paper - offset and so-called “active” (self-copying). The layers are printed simultaneously - the printer records information on the offset layer, and on the “active” layer it is reproduced due to the pressure of the printer head on the paper coated with a layer of microgranules.

Standard size

Be sure to consider the standard size of the cash register offset tape when purchasing. The parameters you need can be found in the accompanying documentation for the cash register. The winding diameter of the roller and sleeve are of fundamental importance. But matching the width is desirable, but not necessary. You can insert a cash register tape of a smaller width than indicated in the specifications into the cash register. But not more.

The standard size of any receipt tape is usually indicated by three numbers. Where the width is indicated first, the winding diameter is indicated in second place, and the third is the diameter of the inner roller sleeve.

As a standard, receipt tape made from one layer of offset paper is:

• in width - six types. The most common of which are 44, 57, 69 and 76 mm wide. Offset tape 37 and 40 mm wide - used extremely rarely;
• by winding Ø - up to 70 mm;
• according to the Ø cross-section of the bushing there are only two types: 12 and 18 mm.

Multilayer receipt tape can be:

• width - from 44 to 69 mm;
• according to the roller winding Ø - from 54 to 70 mm;
• along the Ø section of the sleeve - 12 mm.

Level of whiteness and density of cash register tape

An important parameter of offset receipt tape is its density and level of whiteness. As a rule, in a high-quality receipt tape made of offset paper, these parameters vary within the following limits:

1. Whiteness - from 90 to 98%.
2. Density - from 55 to 65 g/m².

We also recommend paying attention to the smoothness of the tape and the absence of paper dust along the entire length of the roller. It is unlikely that the smoothness of a receipt is important to the consumer, but for a printer, a high-quality receipt tape is the key to a long service life.

Most cash registers have a thermal printer and use the most common receipt tape - thermal tape.

Thermal receipt tape is thick paper with a thermochemical layer that darkens when exposed to heat from the printer's thermal head, resulting in a programmed black and white image on the receipt. Thermal printing is the most economical way to receive receipts, so most cash registers, POS terminals, fiscal registrars, ATMs, and payment terminals use this type of printing.

Advantages of thermal printing:

• there are no costs for purchasing ink ribbon;
• receipts are printed on a thermal printer at high speed.

The main criteria for choosing thermal receipt tape:

• width - from 37 mm to 80 mm, the most common size is 57 and 80 mm;
• tape roll sleeve diameter - 12 mm, 18 mm, 26 mm;
• tape roll diameter - from 25 to 250 mm;
• paper density - from 48 to 55 g/sq.m.

Your printer's manual will tell you the core size and ribbon roll diameter it uses. Should buy Consumables for receipt printing devices in accordance with the technical recommendations of your equipment.

Receipt tape

For printing checks and receipts for accepting payments in banks and wholesalers trade organizations Dot matrix printers are often used. In the process of matrix printing, the printer head uses an impact method to apply an image to a receipt through an ink ribbon, which is packaged in a cartridge. The image is made up of many points.

The dot matrix printer uses classic offset receipt tape. The main criteria for choosing offset receipt tape:

• width - from 37 mm to 76 mm;
• tape roll sleeve diameter - 12 mm, 18 mm;
• tape roll diameter - from 54 to 83 mm;
• paper density - from 48 to 80 g/sq.m;
• number of layers.

Advantages of dot matrix printing:

• offset receipt tape is a cheaper consumable material compared to thermal tape;
• The print quality on a dot matrix printer receipt is more resistant to external influences than on a thermal receipt;
• ink ribbon for matrix receipt printers can be two-color, which distinguishes matrix printing from thermal printing;
• dot matrix printers print carbon copies, self-copying sales receipts on a two-layer or multi-layer receipt tape. Multilayer tape consists of two or several layers of paper, the top layer is ordinary offset paper, microgranules of paint are applied to the lower layers, which, when the print head of the printer hits, produces a copy of the receipt, the top receipt is received by the client, the copies remain in the trading organization.

In our online store you can purchase both offset receipt tape and thermal receipt tape in different sizes.

Privacy agreement

and processing of personal data

1. General Provisions

1.1. This agreement on confidentiality and processing of personal data (hereinafter referred to as the Agreement) was accepted freely and of its own free will, and applies to all information that Insales Rus LLC and/or its affiliates, including all persons included in the same group with LLC "Insails Rus" (including LLC "EKAM Service") can obtain information about the User while using any of the sites, services, services, computer programs, products or services of LLC "Insails Rus" (hereinafter referred to as the Services) and in during the execution of Insales Rus LLC any agreements and contracts with the User. The User’s consent to the Agreement, expressed by him within the framework of relations with one of listed persons, applies to all other listed persons.

1.2.Use of the Services means the User agrees with this Agreement and the terms and conditions specified therein; in case of disagreement with these terms, the User must refrain from using the Services.

"Insales"- Society with limited liability“Insails Rus”, OGRN 1117746506514, INN 7714843760, checkpoint 771401001, registered at the address: 125319, Moscow, Akademika Ilyushina St., 4, building 1, office 11 (hereinafter referred to as “Insails”), on the one hand , And

"User" -

or individual having legal capacity and recognized as a participant in civil legal relations in accordance with the legislation of the Russian Federation;

or entity, registered in accordance with the legislation of the state of which such person is a resident;

or individual entrepreneur registered in accordance with the laws of the state of which such person is a resident;

which has accepted the terms of this Agreement.

1.4. For the purposes of this Agreement, the Parties have determined that confidential information is information of any nature (production, technical, economic, organizational and others), including the results of intellectual activity, as well as information about methods of implementation professional activity(including, but not limited to: information about products, works and services; information about technologies and research works; information about technical systems and equipment, including software elements; business forecasts and information about proposed purchases; requirements and specifications of specific partners and potential partners; information related to intellectual property, and plans and technologies related to all of the above) communicated by one party to the other in writing and/or electronic form, clearly designated by the Party as its confidential information.

1.5. The purpose of this Agreement is to protect confidential information that the Parties will exchange during negotiations, concluding contracts and fulfilling obligations, as well as any other interaction (including, but not limited to, consulting, requesting and providing information, and performing other instructions).

2. Responsibilities of the Parties

2.1. The Parties agree to keep secret all confidential information received by one Party from the other Party during the interaction of the Parties, not to disclose, divulge, make public or otherwise provide such information to any third party without prior written permission the other Party, except for cases specified in the current legislation, when the provision of such information is the responsibility of the Parties.

2.2.Each Party will take all necessary measures to protect confidential information using at least the same measures that the Party uses to protect its own confidential information. Access to confidential information is provided only to those employees of each Party who reasonably need it to perform official duties for the execution of this Agreement.

2.3. The obligation to keep confidential information secret is valid within the validity period of this Agreement, the license agreement for computer programs dated December 1, 2016, the agreement to join the license agreement for computer programs, agency and other agreements and for five years after termination their actions, unless otherwise separately agreed by the Parties.

(a) if the information provided has become publicly available without a violation of the obligations of one of the Parties;

(b) if the information provided became known to the Party as a result of its own research, systematic observations or other activities carried out without the use of confidential information received from the other Party;

(c) if the information provided is lawfully received from a third party without an obligation to keep it secret until it is provided by one of the Parties;

(d) if the information is provided at the written request of the authority state power, other government agency, or organ local government in order to perform their functions and its disclosure to these bodies is mandatory for the Party. In this case, the Party must immediately notify the other Party of the received request;

(e) if the information is provided to a third party with the consent of the Party about which the information is transferred.

2.5.Insales does not verify the accuracy of the information provided by the User and does not have the ability to assess his legal capacity.

2.6.The information that the User provides to Insales when registering in the Services is not personal data as defined in Federal law RF No. 152-FZ dated July 27, 2006. “About personal data.”

2.7.Insales has the right to make changes to this Agreement. When making changes to current edition The date of the last update is indicated. The new version of the Agreement comes into force from the moment it is posted, unless otherwise provided new edition Agreements.

2.8.By accepting this Agreement, the User understands and agrees that Insales may send the User personalized messages and information (including, but not limited to) to improve the quality of the Services, to develop new products, to create and send to the User personal offers, to inform the User about changes in Tariff plans and updates, to send the User marketing materials on the subject of the Services, to protect the Services and Users and for other purposes.

The user has the right to refuse to receive the above information by notifying in writing to the email address Insales -.

2.9. By accepting this Agreement, the User understands and agrees that Insales Services may use cookies, counters, and other technologies to ensure the functionality of the Services in general or their individual functions in particular, and the User has no claims against Insales in connection with this.

2.10.The user understands that the equipment and software, used by him to visit sites on the Internet, may have the function of prohibiting operations with cookies (for any sites or for specific sites), as well as deleting previously received cookies.

Insales has the right to establish that the provision of a certain Service is possible only on the condition that the acceptance and receipt of cookies is permitted by the User.

2.11. The user is independently responsible for the security of the means he has chosen to access his account, and also independently ensures their confidentiality. The User is solely responsible for all actions (as well as their consequences) within or using the Services under account the User, including cases of voluntary transfer by the User of data to access the User’s account to third parties under any conditions (including under contracts or agreements). In this case, all actions within or using the Services under the User’s account are considered to be carried out by the User himself, except in cases where the User notified Insales of unauthorized access to the Services using the User’s account and/or of any violation (suspicion of violation) of the confidentiality of his means of accessing your account.

2.12. The User is obliged to immediately notify Insales of any case of unauthorized (not authorized by the User) access to the Services using the User’s account and/or of any violation (suspicion of violation) of the confidentiality of their means of access to the account. For security purposes, the User is obliged to independently safely shut down work under his account at the end of each session of working with the Services. Insales is not responsible for possible loss or damage to data, as well as other consequences of any nature that may occur due to the User’s violation of the provisions of this part of the Agreement.

3. Responsibility of the Parties

3.1. The Party that has violated the obligations stipulated by the Agreement regarding the protection of confidential information transferred under the Agreement is obliged, at the request of the injured Party, to compensate for the actual damage caused by such violation of the terms of the Agreement in accordance with the current legislation of the Russian Federation.

3.2. Compensation for damage does not terminate the obligations of the violating Party to properly fulfill its obligations under the Agreement.

4.Other provisions

4.1. All notices, requests, demands and other correspondence under this Agreement, including those including confidential information, must be submitted to writing and be delivered in person or through a courier, or sent by e-mail to the addresses specified in the license agreement for computer programs dated December 1, 2016, the accession agreement to the license agreement for computer programs and in this Agreement or other addresses that may subsequently be specified in writing by the Party.

4.2. If one or more provisions (conditions) of this Agreement are or become invalid, then this cannot serve as a reason for termination of the other provisions (conditions).

4.3. This Agreement and the relationship between the User and Insales arising in connection with the application of the Agreement are subject to the law of the Russian Federation.

4.3. The User has the right to send all suggestions or questions regarding this Agreement to the Insales User Support Service or to the postal address: 107078, Moscow, st. Novoryazanskaya, 18, building 11-12 BC “Stendhal” LLC “Insales Rus”.

Publication date: 12/01/2016

Full name in Russian:

Limited Liability Company "Insales Rus"

Abbreviated name in Russian:

LLC "Insales Rus"

Name in English:

InSales Rus Limited Liability Company (InSales Rus LLC)

Legal address:

125319, Moscow, st. Akademika Ilyushina, 4, building 1, office 11

Mailing address:

107078, Moscow, st. Novoryazanskaya, 18, building 11-12, BC “Stendhal”

INN: 7714843760 Checkpoint: 771401001

Bank details:

Cash register tape from the manufacturer

Cash or receipt tape - an unchanged attribute modern business. Any a store, a firm or company involved in the sale of goods or services, uses this consumable material in its activities.

Scope of application of cash register printer ribbon

This product serves as the basis for printing receipts and reporting forms using terminals and cash registers. Information about transactions performed within the company is printed on a strip of paper, which can subsequently be used in internal and external reporting. When a consumer expresses a desire to buy a product or service and pays for it in any store, mall, a catering facility, the sale, or rather its fact, is confirmed by the seal of the receipt. Depending on the cash register model, you can use a receipt tape of a specific width, winding length, and with a certain number of layers. Data on the required consumables for a specific device are always indicated in the equipment passport.

Types and types

Today you can buy wholesale and retail several types of receipt tape: single- and multi-layer options, paper with a thermal layer are widely used. Each material option is created for certain units and a special type of printing, so prices for ribbon paper may vary. A certain cash register may have a roll of a specific size installed, so products are marked depending on the width of the roll, for example, 44, 57 or 69 mm.

What is the difference between consumable tape for cash registers and material for terminals?

1. Single-layer tape is used for printing non-fiscal receipts and internal reporting receipts. This rolled material is made from offset paper with a whiteness of at least 98% and writing paper with a whiteness of 92%. The main requirement for it is high-quality and rapid absorption of paint.

2. Cash register tape with several layers is used to copy information about a trade transaction. The first layer of paper with printed data remains in the cash register for reporting, the other layer is given to the buyer as a receipt.

3. Special versions of offset paper products are designed to work with special inks or thermal ribbon. They develop symbols such as lot number, price, printing date when exposed to a certain temperature. This consumable is used for bank terminals and in some self-service stores. It has a special coating, due to which it darkens when interacting with a hot printing element of the equipment.

From us you can order any type of tape for check machines and terminals - the catalog contains single- and double-layer products of popular types and sizes. You can wholesale products of any size and roll width at a competitive price.

Our company is a manufacturer, therefore it offers the best prices in the region and the ability to supply wholesale consumables for cash registers, terminals and other printing equipment.

By contacting the company “1C: Accounting and Trade” (BIT) you can purchase not only software and commercial equipment, but also all the consumables necessary for its correct operation. For example, you can quickly buy a receipt tape by calling our managers and guarantee no downtime for your trading or service company, because customer service can only be provided by providing them with confirmation of the purchase or provision of services.

Our company has an extensive network of regional branches and a wide network of offices in the capital, which allows us to be closer to the client. You just need to contact the nearest 1C: Accounting and Trade (BIT) office to satisfy all your wishes related to the installation commercial equipment and trade automation. For example, if you need a receipt tape in Moscow, select the nearest one from the list of our offices and contact our professional managers. By purchasing the necessary consumables at BIT, you buy the necessary products High Quality at a reasonable price.

Cash register tape is one of the most sought after consumables needed to keep things running cash register equipment, - and therefore the entire store. Therefore, untimely purchase of tape can result in serious financial losses. Keep track of how much tape is left in your store and purchase high-quality consumables from a trusted partner!

Selling receipt tape on favorable terms

• The assortment includes receipt tape for various cash registers. On your own or with the help of experienced First BIT specialists, you can easily select consumables that match the installed equipment.
• We sell only high quality receipt tape. You can choose one- or two-layer products for thermochemical and capillary printing.
• All receipt tape is accessible. You can buy it in the required quantity at the best price.

Explore the catalog! Any questions? Ask them to the First BIT managers. With their help, you will select the type of receipt tape you need.