Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Part No. 1 of Issue No. 36 of ETKS
The issue was approved by the Decree of the USSR State Committee for Labor and social issues and All-Union Central Council of Trade Unions of June 7, 1984 N 171/10-109
(as amended by the Resolutions of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions dated 02/03/1988 N 51/3-69, dated 08/14/1990 N 325/15-27, Ministry of Labor of the Russian Federation dated 11/21/1994 N 70, dated 07/31/1995 N 43)

Operator technological installations

§ 28. Operator of technological installations of the 2nd category

Characteristics of work. Maintenance of devices, pumps, ventilation and heating systems under the guidance of a more highly qualified operator. Pumping, pouring and packaging of lubricants, oils, paraffin, bitumen and other similar products. Measuring gauges. Sample selection. Loading and unloading catalysts. Cleaning of equipment and furnaces.

Must know: installation of serviced equipment, fittings and communications; purpose of instrumentation; physical and chemical properties of raw materials and manufactured products; rules for packaging and design of products.

§ 29. Operator of technological installations of the 3rd category

Characteristics of work. Conducting the technological process at installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions under the guidance of a more highly qualified operator. Maintenance of apparatus, fans, waste heat boilers or superheaters, pyrite separators, boat furnaces, tunnel furnaces, gas generators and other similar equipment in process plants. Switching from operating equipment to standby equipment. Change of alkali. Drainage of water from devices. Regulation of the supply of reagents, fuel, steam, water, electricity in the serviced area; adjustment of the supply of raw materials for crushing and grinding, grinding degree. Conducting the combustion process in the furnace of a drying kiln or kiln-mill. Quality control, accounting for the consumption of raw materials, reagents and the quantity of products produced. Loading and unloading coke from storage silo cars. Coke removal from belt conveyors, classifiers, feeders, and on railway tracks. Participation in the repair of technological installations.

Must know: technological processes, diagrams and maps of serviced installations; rules for regulating the technological process; arrangement of serviced equipment, purpose and principle of operation of instrumentation; physical and chemical properties of raw materials, reagents, resulting products, materials used; basics of plumbing.

§ 30. Operator of technological installations of the 4th category

Characteristics of work. Conducting the technological process and monitoring the operation of equipment at category III installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions. Conducting the technological process and monitoring the operation of individual units at installations of categories I and II under the guidance of a more highly qualified operator. Adjusting the performance of the unit, installation, department. Prevention and elimination of process deviations from the specified mode. Monitoring the output and quality of products, consumption of reagents, and energy resources. Starting and stopping the heating system of chamber and tunnel furnaces and adjusting their hydraulic mode; maintenance of belt conveyors, screening, classification of petroleum coke by fractional composition under the guidance of a more highly qualified operator in delayed coking units. Servicing control and automation devices, preparing cartograms, changing them, filling pens with ink, checking devices to “0”. Monitoring the condition of the heating system masonry. Start, stop the installation and put it into operation. Preparation of individual devices and the installation as a whole for repair. Participation in the repair of technological installations.

Must know: technological processes, diagrams and maps of serviced installations; device technological equipment, instrumentation, pipelines, fittings; factors influencing the progress of the process and product quality.

§ 31. Operator of technological installations of the 5th category

Characteristics of work. Conducting the technological process and monitoring the operation of equipment at category II installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions. Conducting the technological process on category I installations under the guidance of a more highly qualified operator. Monitoring compliance with the technological regime, the quality of raw materials and manufactured products according to the readings of instrumentation and analysis results. Control over the consumption of raw materials, products, reagents, catalysts, fuel and energy resources.

Prevention and elimination of process deviations from the specified mode. Filling out the log of reception and delivery of duties.

Must know: technological processes, diagrams and maps of serviced installations; arrangement of serviced equipment; physical and chemical properties of raw materials, reagents and manufactured products; GOSTs for raw materials and products.

§ 32. Operator of technological installations of the 6th category

Characteristics of work. Conducting the technological process and monitoring the operation of equipment at category I installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions. Management of the elimination of emerging technological process deviations and accidents. Arrangement of operators at work stations. Maintaining the technological process and monitoring, under the guidance of a more highly qualified operator, the work of individual units, departments (installations) at technological complexes, combined and large-scale installations of the highest category.

(as amended by Resolution of the Ministry of Labor of the Russian Federation dated July 31, 1995 N 43)

Must know: technological processes, diagrams and maps of serviced installations; kinematic and electrical diagrams of technological equipment; circuit diagrams the main installations of the plant and their relationship; production technology.

Secondary specialized education required.

§ 32a. Technological installation operator, 7th category

(introduced by Decree of the Ministry of Labor of the Russian Federation dated July 31, 1995 N 43)

Characteristics of work. Conducting the technological process at installations of the highest category: technological complexes, combined and large-scale installations for the processing of oil, petroleum products, gas in accordance with work instructions. Monitoring the operation of equipment and regulating the technological regime according to the readings of instrumentation from the control panel. Ensuring synchronized operation of all technological units and departments (installations). Monitoring compliance with technological process parameters, identifying and analyzing deviations from specified modes and managing the work for their timely elimination. Ensuring the correct and timely execution of primary documentation for the technological process. Supervising the work of lower-skilled operators.

Must know: technological process; diagrams and maps of serviced technological complexes (installations); schematic diagrams of control panels; methods for systematizing and processing data on permissible deviations of the technological process and ways to eliminate them; methods of training personnel of complexes (installations).

Secondary vocational education required.

When servicing installations of the highest category, equipped with distribution control systems - 8th category.

This job description translated automatically. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Operator of technological installations of the 3rd category" belongs to the category "Workers".

1.2. Qualification requirements- complete or basic general secondary education. Vocational and technical education without requirements for work experience or obtaining a profession directly in production, advanced training and work experience in the profession of operator of technological installations of the 2nd category for at least 1 year.

1.3. Knows and applies in practice:
- technological processes, diagrams, maps of installations that are serviced;
- rules for regulating the technological process;
- design of the equipment that is being serviced, the purpose and principle of operation of instrumentation;
- physical and chemical properties of raw materials, reagents, products manufactured at the enterprise, materials used;
- basics of plumbing;
- instructions on labor protection by profession and type of work;
- properties of harmful, dangerous and toxic substances that are used when performing work related to professional duties.

1.4. An operator of technological installations of the 3rd category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. The operator of technological installations of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. A 3rd category technological installation operator supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The operator of technological installations of the 3rd category during his absence is replaced by a person appointed in in the prescribed manner, which acquires the corresponding rights and is responsible for the proper fulfillment of the duties assigned to it.

2. Characteristics of work, tasks and job responsibilities

2.1. Carries out the technological process at installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions under the guidance of a highly qualified operator.

2.2. Maintains apparatus, fans, waste heat boilers or superheaters, pyrite separators, boat furnaces, tunnel furnaces, gas generators and other similar equipment in process installations.

2.3. Switches from operating equipment to standby equipment.

2.4. Replaces meadow.

2.5. Drains water from devices.

2.6. Regulates the supply of reagents, fuel, steam, water, electricity in the area being serviced; regulates the supply of raw materials for crushing and grinding, and the degree of grinding.

2.7. Carries out the combustion process in the furnace of a drying furnace or furnace-mill.

2.8. Controls the quality, accounting for the consumption of raw materials, reagents and the quantity of products produced.

2.9. Loads and unloads coke from storage silo cars.

2.10. Removes coke near belt conveyors, classifiers, feeders, and railway tracks.

2.11. Participates in the repair of technological installations.

2.12. Knows, understands and applies current regulations relating to his activities.

2.13. Knows and complies with the requirements of regulations on labor protection and environment, complies with the standards, methods and techniques of safe work performance.

3. Rights

3.1. The operator of technological installations of the 3rd category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. An operator of technological installations of the 3rd category has the right to receive all social guarantees provided for by law.

3.3. An operator of technological installations of the 3rd category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. The operator of technological installations of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. An operator of technological installations of the 3rd category has the right to get acquainted with draft documents relating to his activities.

3.6. An operator of technological installations of the 3rd category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. An operator of technological installations of the 3rd category has the right to improve his professional qualifications.

3.8. The operator of technological installations of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An operator of technological installations of the 3rd category has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of job duties.

4. Responsibility

4.1. The operator of technological installations of the 3rd category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The operator of technological installations of the 3rd category is responsible for failure to comply with internal rules labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.

4.3. The operator of technological installations of the 3rd category is responsible for the disclosure of information about the organization (enterprise/institution) related to trade secrets.

4.4. The operator of technological installations of the 3rd category is responsible for failure to fulfill or improper fulfillment of internal requirements regulatory documents organization (enterprise/institution) and legal orders of management.

4.5. The operator of technological installations of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The operator of technological installations of the 3rd category is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The operator of technological installations of the 3rd category is responsible for misuse granted official powers, as well as their use for personal purposes.

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Operator of technological installations of the 4th category" belongs to the category "Workers".

1.2. Qualification requirements: complete or basic general secondary education. Vocational and technical education. Training. Work experience in the profession of operator of technological installations of the 3rd category for at least 1 year.

1.3. Knows and applies in practice:
- technological processes, diagrams and maps of installations that are serviced;
- arrangement of technological equipment, instrumentation, pipelines, fittings;
- factors influencing the progress of the process and product quality;
- instructions on labor protection by profession and type of work;
- properties of harmful, dangerous and toxic substances that are used when performing work related to professional duties.

1.4. An operator of technological installations of the 4th category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. The operator of technological installations of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. A 4th category technological installation operator supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During absence, an operator of technological installations of the 4th category is replaced by a person appointed in accordance with the established procedure, who acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Carries out the technological process and monitors the operation of equipment at III category installations for the processing of oil, petroleum products, gas, shale and coal in accordance with work instructions.

2.2. Carries out the technological process and monitors the operation of individual units at installations of categories I and II under the guidance of a highly qualified operator.

2.3. Adjusts the performance of the unit, installation, department.

2.4. Prevents and eliminates process deviations from the specified mode.

2.5. Monitors the output and quality of products, consumption of reagents, and energy resources.

2.6. Starts and stops the heating system of chamber and tunnel furnaces and regulates their hydraulic mode; services belt conveyors, carries out screening, classification of petroleum coke by fractional composition under the guidance of a more highly qualified operator at delayed coking plants.

2.7. Maintains control and automation devices, prepares cartograms, replaces them, fills pens with ink, checks devices to “0”.

2.8. Monitors the condition of the heating system masonry.

2.9. Starts, stops the installation and puts it into operation.

2.10. Prepares individual devices and installations as a whole for repair.

2.11. Takes part in the repair of technological installations.

2.12. Knows, understands and applies current regulations relating to his activities.

2.13. Knows and complies with the requirements of regulations on labor protection and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The operator of technological installations of the 4th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. An operator of technological installations of the 4th category has the right to receive all social guarantees provided for by law.

3.3. An operator of technological installations of the 4th category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. An operator of technological installations of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. An operator of technological installations of the 4th category has the right to get acquainted with draft documents relating to his activities.

3.6. An operator of technological installations of the 4th category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. An operator of technological installations of the 4th category has the right to improve his professional qualifications.

3.8. The operator of technological installations of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An operator of technological installations of the 4th category has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of job duties.

4. Responsibility

4.1. The operator of technological installations of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The operator of technological installations of the 4th category is responsible for failure to comply with internal labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.

4.3. The operator of technological installations of the 4th category is responsible for the disclosure of information about the organization (enterprise/institution) related to trade secrets.

4.4. The operator of technological installations of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. The operator of technological installations of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The operator of technological installations of the 4th category is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The operator of technological installations of the 4th category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

JOB DESCRIPTION

operator of technological installations of the 4th category

1. General Provisions

1.1. This job description defines the functional, job responsibilities, rights and responsibilities of the operator of technological installations of the 4th category of the division " Technological technologies» (hereinafter referred to as the Operator of technological installations of the 4th category) PJSC Gazprom (hereinafter referred to as the Establishment).

1.2. A person who meets the following education and training requirements is appointed to the position of 4th category technological installation operator:

Professional education- vocational training programs for workers' professions, retraining programs for workers, advanced training programs for workers;

Secondary vocational education - training programs for skilled workers;

with practical work experience:

At least one year in a profession with a lower (previous) rank;

Special conditions for admission to work as an operator of technological installations of the 4th category:

At least 18 years of age;

Carrying out work at a height of 1.8 m or more requires special permission;

Completion of training and testing of knowledge of norms and rules of work in electrical installations as electrical engineering personnel in the amount of Group III on electrical safety (up to 1000 V);

Measures training fire safety, including completing fire safety training and fire-technical minimum according to the relevant program;

Completing training and testing knowledge of labor protection and safety requirements in the prescribed manner;

Completion of mandatory preliminary (upon employment) and periodic medical examinations(examinations), as well as extraordinary medical examinations (examinations) in accordance with the legislation Russian Federation ok;

1.3. An operator of technological installations of the 4th category must know:

Types of repairs and the sequence of work on the removal of main and auxiliary equipment for repair and its acceptance from repair;

Procedure and rules for testing process equipment and pipelines of gas collection and treatment installations;

Work rules increased danger, including fire and gas hazardous;

Specified technological modes of equipment;

Labor protection, industrial, fire and environmental safety requirements;

Requirements for workplace equipment;

Fundamental technology system and communication diagram of the serviced equipment of gas collection and treatment installations;

Technological regulations, operating instructions for gas collection and treatment plants;

Operating principles of the control panel;

Material consumption standards for work performed;

Physico-chemical and biological properties of gas, gas condensate, chemical reagents, procedure and rules for their disposal;

Rules for working on a personal computer in the user's scope, used software by area of ​​activity;

Technological processes, diagrams and maps of gas collection and treatment installations;

Rules for regulating the technological process at gas collection and treatment plants;

Emergency response plan;

Rules for operating automation equipment;

Rules for starting and stopping equipment of gas collection and treatment plants;

Fundamentals of thermodynamics, mechanics, hydraulics and gas dynamics;

Operating parameters of equipment for gas collection and treatment installations;

Design and permissible values ​​of parameters of technological modes of gas collection and treatment installations;

Purpose, design and rules for using instrumentation and instruments;

Procedure for troubleshooting equipment in gas collection and treatment installations;

Limit values ​​of gas contamination in the working area of ​​gas collection and treatment installations;

Rules, instructions for operating equipment, tools and devices used;

Purpose, procedure for registration, application of operational and technical documentation;

Purpose and principle of operation of instrumentation and control systems installed on the equipment of gas collection and treatment plants;

Types of malfunctions of devices, pumps, injection molding machines and the reasons for their occurrence;

Labor protection, industrial, fire and environmental safety requirements;

Design, purpose and principle of operation of equipment, injection molding machines and communications of gas collection and treatment installations;

1.4. An operator of technological installations of the 4th category must be able to:

Prepare equipment, apparatus, injection molding machines, installation communications for repair;

Launch and bring technological equipment to a given mode;

Monitor high-risk work at gas collection and treatment facilities;

Carry out pneumatic and hydraulic tests of process equipment and pipelines of gas collection and treatment installations during repairs;

Perform shutdowns (switching) of serviced equipment in connection with the start and stop of a department, unit, installation;

Bring the pressure in the process equipment to operating parameters;

Collect process flow diagrams;

Monitor the work of employees more low level qualifications;

Assess the correct operation of equipment, devices, installations during testing;

Work with a personal computer and its peripheral devices, office equipment;

Determine the reasons for disruption of the operation of gas collection and treatment facilities;

Fulfill technological operations for emergency shutdown of serviced equipment;

Arrange for the workplaces of operators of technological installations of lower qualification levels;

Identify deviations from the normal operation of gas collection and treatment equipment;

Record information readings from instruments of instrumentation and automation equipment;

Use personal and collective protective equipment;

Adjust process parameters;

Bring process equipment into operating mode from the control panel and/or at the equipment installation site;

Analyze the consumption of reagents, fuel and energy resources for compliance with established standards;

Register in operational documentation the values ​​of operating modes of gas collection and treatment installations;

Start and stop technological units, departments (installations);

Assess the operating parameters of the main and auxiliary equipment of gas collection and treatment installations;

Use communication means to exchange information with the manager (process installation operator of a higher level of qualification);

Check the serviceability of tools and devices;

Use manual locksmith tool, electric and pneumatic tools;

Eliminate malfunctions in the operation of gas collection and treatment equipment;

Read technical documentation general and specialized purposes;

Use portable measuring instruments to determine the level of air pollution;

Determine the operating parameters of gas collection and treatment installations based on the readings of instrumentation and automation equipment, centralized control and alarm systems;

Organize the elimination of major malfunctions in the operation of equipment at gas collection and treatment plants;

Determine the causes of malfunctions in the operation of gas collection and treatment installations;

Identify deviations from the normal operating mode of gas collection and treatment installations;

Monitor the operation of serviced equipment according to the readings of measuring instruments;

Fill out operational, technical documentation on the technical condition of gas collection and treatment installations;

Determine the need for spare parts, tools and devices;

1.5. An operator of technological installations of the 4th category is appointed and dismissed by order of the deputy chairman of the board of the Institution in accordance with the current legislation of the Russian Federation.

1.6. The operator of technological installations of the 4th category reports to the deputy chairman of the board of the Institution and the head of the “Technological technologies” department

2. Labor functions

2.1. Carrying out work on bringing out for repairs and putting into operation after repair gas collection and treatment facilities.

2.2. Maintaining the technological process at gas collection and treatment plants.

2.3. Control technical condition and the operability of gas collection and treatment facilities.

3. Job responsibilities

3.1. Control of high-risk work performed at gas collection and treatment facilities.

3.2. Commissioning and bringing the operating parameters of gas collection and treatment units to the specified mode.

3.3. Pneumatic and hydraulic testing of process equipment and pipelines of gas collection and treatment plants.

3.4. Inspection of equipment, devices, installations after repair for integrity and completeness.

3.5. Monitoring the repair of equipment and devices at gas collection and treatment plants.

3.6. Monitoring the performance of work on preparation for repair of gas collection and treatment installations by operators of lower qualification levels.

3.7. Performing actions to increase (decrease) the pressure of commercial gas in the system to operating parameters.

3.8. Inspection of the equipment of gas collection and treatment installations for the presence of gas and liquid leaks upon completion of repair work.

3.9. Bringing out technological equipment (installation) for repair.

3.10. Assembly of process flow diagrams.

3.11. Purging of process equipment (installation) with inert gas.

3.12. Analysis of the consumption of reagents, fuel and energy resources for compliance with established standards.

3.13. Taking instrumentation and instrumentation readings to record the quality and consumption of reagents in the control room of gas collection and treatment plants.

3.14. Taking action when an event occurs emergency situations at gas collection and treatment facilities in accordance with the emergency response plan.

3.15. Maintaining operational and technical documentation on technological modes of gas collection and treatment plants.

3.16. Placement of technological unit operators of lower qualification levels into workplaces and control of their work.

3.17. Informing the immediate supervisor (engineering and technical worker, operator of a technological installation of a higher level of qualification), the dispatcher about identified deviations from the specified technological regime.

3.18. Starting, stopping technological equipment (installation) and bringing it into operating mode from the control panel (not related to repair work).

3.19. Regulation of the technological process (mode) from the control panel in the control room of gas collection and preparation installations and/or at the installation site of process equipment as directed by the dispatcher.

3.20. Formation in the established order of requests for elimination of major malfunctions in the operation of equipment of gas collection and treatment plants.

3.21. Detection of malfunctions in the operation of gas collection and treatment installations.

3.22. Checking the serviceability (operability) of the fire extinguishing system (foam fire extinguishing - containers with water and foaming agent, pumps, mixer-injectors, fire piping systems with injection molding machines, foam generators; powder and carbon dioxide fire extinguishing - cylinders with fire extinguishing agent, pipelines with injection molding machines, nozzles and sprayers; water fire extinguishing equipment - fire hoses with barrels), primary fire extinguishing means.

3.23. Monitoring the availability of spare parts, tools and devices in the workplace.

3.24. Monitoring gas contamination in the working area of ​​gas collection and preparation installations using portable measuring instruments.

3.25. Acceptance and handover of shifts with familiarization with the current state of operating and backup equipment, operating modes of gas collection and treatment units, entries in the operational log, order log.

3.26. Monitoring of equipment at gas collection and treatment installations for tightness of connections, as well as for the absence of mechanical damage and extraneous noise.

3.27. Monitoring the timeliness of Maintenance gas collection and treatment installations.

3.28. Troubleshooting equipment in gas collection and treatment plants.

4.2. Improve your qualifications, undergo retraining (retraining).

4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of the operator of 4th category technological installations.

4.4. Take part in the discussion of issues included in his functional responsibilities.

4.5. Make suggestions and comments on how to improve activities in the assigned area of ​​work.

4.6. Contact the relevant authorities local government or to court to resolve disputes arising during the performance of functional duties.

4.7. Use information materials and regulatory documents necessary to perform your job duties.

4.8. Pass certification in the prescribed manner.

5. Responsibility

The operator of technological installations of the 4th category is responsible for:

5.1. Failure to perform (improper performance) of one’s functional duties.

5.2. Failure to comply with orders and instructions from the Deputy Chairman of the Board of the Institution.

5.3. Inaccurate information about the status of fulfillment of assigned tasks and instructions, violation of deadlines for their execution.

5.4. Violation of internal labor regulations, fire safety and safety rules established in the Institution.

5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.

5.6. Disclosure of information that has become known in connection with the performance of official duties.

For the above violations, the operator of technological installations of the 4th category may be subject to disciplinary, material, administrative, civil and criminal liability in accordance with current legislation, depending on the severity of the offense.

This job description has been developed in accordance with the provisions (requirements) Labor Code Russian Federation dated December 30, 2001 No. 197 Federal Law (Labor Code of the Russian Federation) (as amended and supplemented), professional standard“Employee for the operation of equipment for underground gas storage facilities” approved by order of the Ministry of Labor and Social Protection of the Russian Federation dated March 13, 2017 No. 262n and other regulations governing labor relations.

A technological installation, according to the dictionary definition, is a group workplace with various units, which is serviced by a team of workers. Each of them is responsible for a particular equipment (group of equipment), maintains it and ensures the correct mode of operation. Process plants most often refer to oil and gas processing equipment. The raw material can also be another substance (for example, air, coal, shale, etc.) that is processed into the final product.

The essence of the work of a process plant operator

A technological installation for oil or gas processing includes a lot of various equipment:

Refrigeration and condensing units;

Distillation columns;

Heaters;

Compressors and pumps.

As is already clear from the name of the profession, a process plant operator is responsible for certain technological processes in production. It ensures uninterrupted operation of all units and monitors the performance of the entire system.

In practice, however, they do not always trust him with their area of ​​work. The least qualified specialists perform only auxiliary functions under the supervision of senior specialists and the chief technologist.

At the same time, the responsibilities of a process plant operator only become greater as their qualifications increase. The most qualified specialist must be able to work on oil and gas processing installations of the highest category of complexity. At the same time, he has to do a lot of manual dirty work and engage in rather routine duties.

As a rule, by this time the employee has already risen to the position of team leader and manages subordinates, as well as trains new employees.

In general terms, the responsibilities of the operator of technological installations are as follows:

Monitoring the readings of instrumentation;

Regulation of the technological mode from the control panel;

Ensuring the synchronization of cycles throughout production;

Participation in scheduled repairs and maintenance;

Sampling of raw materials and final product;

Accounting for raw materials, reagents, fuel, etc.;

Maintaining a log of reception and delivery of duties.

As you can see, the profession of a process plant operator does not differ in any variety. Here everything is subject to strict regulations and pre-developed technological processes.

At the same time, oil and gas processing does not stop for a minute, so teams of operators work in shifts 12 hours a day.

The working conditions of the operator of technological installations are classified as harmful and especially dangerous, therefore he is entitled to certain benefits and compensation payments.

Requirements for the skills and qualities of a process plant operator

Of course, a serious strategic facility, which by law is all oil refineries in the country, cannot hire a completely unskilled worker.

The work of a process plant operator involves high responsibility. He must quickly make decisions and change the operation of equipment.

Therefore, such a specialist must know:

technological process of processing raw materials (what is organized and in what order);

the purpose and design of the equipment it serves;

rules for using instrumentation;

physical and chemical properties of raw materials, reagents and finished product, GOST standards for all raw materials.

A good operator should also have at least basic plumbing skills.

A specialist is required to be attentive, disciplined, have a responsible approach to work and the ability to make timely decisions.

Training for process plant operators

Such a specialty implies high responsibility, therefore specialists in this category are trained in colleges, technical schools and other training centers average vocational education. Required condition for employment - passing industrial practice at the enterprise.

As a rule, they are accepted into such educational establishments only after finishing 11th grade high school. The highest quality and comprehensive education can only be obtained through full-time education. However, retraining is possible to suit the position held. You can resort to it if you have another basic specialty in the processing industry.

Qualification categories of process plant operators according to ETKS

There are seven categories for such specialist workers (from 2nd to 8th). At the same time, in order to receive the fifth category and higher, specialized professional education is required

Technological installation operator 2nd category

Performs auxiliary works under the guidance of a more experienced specialist: maintenance of pumps, fans, furnaces and other equipment. Packaging of lubricants, oil, paraffin, bitumen, etc.

Technological installation operator 3rd category

Gets the opportunity to manage installations for the processing of oil, petroleum products, gas, shale and coal under the supervision of a more highly qualified operator. Can also handle accounting of raw materials, reagents and fuel.

Technological installation operator 4th category

Conducts the process of refining oil and other raw materials on technological installations of the III category of complexity. Also has the right to work on installations of categories I and II under the supervision of a more qualified operator.

Technological installation operator 5th category

Can work independently at installations for the processing of oil, gas and other raw materials of category II (primary processing). Work on category I installations under the guidance of a more experienced operator.

Technological installation operator 6th category

Can service technological installations for the processing of oil, gas and other raw materials of category I according to technological instructions (primary processing). Also supervises the work of less qualified employees. Can work under the supervision of a senior operator on large-scale installations of the highest category.

Technological installation operator 7th category

Has the right to service the technological complex of large-capacity oil and gas processing equipment of the highest category. Supervises the work of subordinates, organizes industrial training, maintains primary technical documentation for raw material processing.

Technological installation operator 8th category

It does everything the same as the previous category, however, it manages the work on installations with a distribution control system.

What is the salary of a process plant operator?

The work of process plant operators is in demand in the north. In this case, the employer offers a rotation method.

However, it is much more common Full time job with a shift schedule. Predictably, such workers are in demand in the regions where oil refining enterprises are located: Tatarstan, Bashkiria, Tyumen region, Omsk, etc.

The salary of a specialist depends heavily on experience and qualifications. A highly qualified employee can receive up to 120 thousand rubles a month, less experienced ones, of course, much lower.

Pros and cons of being a process plant operator

pros professions:

demand in the labor market;

high level salaries as experience increases;

opportunity career growth;

official employment according to Labor Code and a full social package;

benefits and compensation for harmful conditions labor.

Minuses professions:

harmful and dangerous production;

great responsibility;

the need for continuous training and experience.